EVSE INSTALLATION TESTING
Check out EVSE testing solutions
MULTIFUNCTION TESTERS
See our wide range of testers
SAFE ISOLATION
Be safe on site
PAT TESTERS
For all your PAT requirements
MULTIMETERS
We stock DMM’s to suit all budgets
CLAMP METERS
From mA to kA – click here!
Calibration Within 24hrs
Fast turnaround on your equipment
Fixed Price Repairs Why send your equipment elsewhere
Independent Suppliers Major test lead brands on sale
Money Back Guarantee Return your item within 30 days
Latest Products
-
Save
53%
On RRP
IN STOCKDiLog DL9130 Multifunction Tester & DLEV1 Adapter Kit
£945.00 Inc VAT: £1,134.00 Add to basket- Complete kit, includes DL9130 MFT & EV Adaptor
- EV Auto RCD Sequence - 6mA RDC-DD for EV Testing
- Cheapest full EV test kit currently available!
- Type AC, A, B & Selective RCDs
- Variable RCD Test
- Rmax and Zmax Feature
- Intelligent Auto Sensing High
- Current 2 & 3 Wire Loop Test
- New Colour Changing RGB Display
- Selectable 15/200mA Continuity Test
- Remote Test Probe
- Full UKAS Calibration Certificate
-
Save
29%
On RRP
Fluke ST240+ Socket Tester
£25.56 Inc VAT: £30.67 Add to basket- Save time by eliminating multiple trips back and forth by using the beeper to help identify if a circuit breaker is switched on or off
- Equipped with a integrated RCD test; feel secure knowing your RCD outlets are functioning correctly
- Hear the results with a beeper which lets you know anytime voltage is detected
- A handy chart to quickly identify 1 of 6 outlet wiring conditions:
- Correct installation
- Earth fault
- Neutral fault
- Live fault
- Live/neutral reversed
- Live/earth reversed
-
Save
10%
On RRP
Fluke TB25 Tool Bucket Organizer Bag
£63.90 Inc VAT: £76.68 Add to basket- 28 total pockets on the inside and outside
- 5.2 gallon capacity bucket
- padded carrying straps to carry by hand or on your shoulder
-
Hikmicro Eco Handheld Thermal Camera
Key Features£179.00 Inc VAT: £214.80 Add to basket- Thermal Only Camera
- SuperIR: 240 × 240 (57,600 pixels)
- -20 deg C to 550 deg C Measurement Range
- Thermal resolution: 96 × 96 (9,216 pixels)
- 112:1 Distance to spot ratio (D:S)
- SuperIR: 240 × 240 (57,600 pixels) with Thermal Fusion Technology
- NETD: < 50 mK (@ 25°C, F# = 1.0)
- Measurement presets: center spot, hot spot, cold spot, off
- 25 Hz image frequency
- Laser pointer
- Built-in 4 GB flash memory: 30,000 pictures
- Up to 8 hours continuous running
-
Hikmicro Eco V Handheld Thermal Camera
Key Features£209.00 Inc VAT: £250.80 Add to basket- Visible Camera
- Thermal/Fusion/Visual
- SuperIR: 240 × 240 (57,600 pixels) with Thermal Fusion Technology
- Thermal resolution: 96 × 96 (9,216 pixels)
- 112:1 Distance to spot ratio (D:S)
- SuperIR: 240 × 240 (57,600 pixels) with Thermal Fusion Technology
- NETD: < 50 mK (@ 25°C, F# = 1.0)
- Measurement presets: center spot, hot spot, cold spot, off
- 25 Hz image frequency
- Laser pointer
- Built-in 4 GB flash memory: 30,000 pictures
- Up to 8 hours continuous running
-
Hikmicro Pocket E Mini Thermal Camera
£259.00 Inc VAT: £310.80 Add to basket- Visible Camera
- Thermal/Visual/Fusion/PIP/Blending
- 3.5" LCD Touch Screen
- Thermal resolution: 96 × 96 (9,216 pixels), NETD: < 50 mK (@ 25°C, F# = 1.0)
- SuperIR: 240 × 240 (57,600 pixels)
- Accurately measure temperature from -20°C to 350°C (-4°F to 662°F)
- 112 : 1 Distance to spot ratio (D : S)
- Accuracy: Max. (± 2°C/3.6°F, ± 2%)
- 25 Hz image frequency
- Thermal, Fusion, PIP, and Visual modes
- Manual, automatic, and 1-Tap level and span
- High temperature alarm
- Built-in 4 GB memory
- LED work light
- 1.0× to 4.0× continuous digital zoom
- 0.3 MP visual camera
- Up to 4 hours continuous running
-
Save
41%
On RRP
IN STOCKMegger MFT-X1 Multifunction Tester
£1,350.00 Inc VAT: £1,620.00 Add to basket- Designed for testing EVSE Installations
- Automatic test sequences for EVSE RCDs
- Confidence Meter: indicates the confidence in the accuracy of the loop impedance result
- Troubleshoot and verify the installation and safety of industrial, commercial and fixed wiring installations
- Includes all the tests required to complete the necessary electrical certification for the aforementioned electrical systems
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Suitable for conducting full single- and three-phase compliant insulation testing
- Conduct single- and three-phase RCD testing between 10mA and 1A
- New non-trip loop impedance technology
- Test 10mA type AC and A RCDs
- Prevents RCDs from influencing total loop impedance values
- Non-trip loop impedance tests can be performed in eight seconds
- Confidence Meter improves reliability: digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise
- Test EVSE RCDs
- 6mA DC test (requires OPTIONAL accessory) for testing EVSE RCDs
- Large, clear backlit display
- Digital/ analogue arc indicates fluctuating readings
- Dual digital readout: indicates the precise reading and the test parameters simultaneously
- Internal memory: capacity for 1000 readings
- Download measurements via Bluetooth
- Colour coded function controls
- No complicated screens
- No hidden menus
- Ambidextrous design: TEST and LOCK buttons on either side of the unit
- Automatic test start: frees up the user’s hands for holding probes
- Can stand independently
- Can be hung around the operator’s neck using the included neck strap
- Internal rechargeable batteries: recharge in under four hours
- Rubber over-mould for protection in tough environments
- IP54
- EN61010 CAT IV safety rated: can withstand accidental misuse and voltage transients
- Can be connected anywhere within the low voltage network on single and three-phase systems
- Visual and audible warning when hazardous voltages are detected
- Displays the voltage value when a live voltage is detected during insulation and continuity tests
- When the detected voltage exceeds a safe level testing will be stopped and a warning beep is issued
- A versatile, practical and reliable electrical tester
-
Save
40%
On RRP
IN STOCKMegger MFT-X1 Multifunction Tester & EVCA210 Kit
£1,715.00 Inc VAT: £2,058.00 Add to basket- Designed for testing EVSE Installations
- Automatic test sequences for EVSE RCDs
- Confidence Meter: indicates the confidence in the accuracy of the loop impedance result
- Troubleshoot and verify the installation and safety of industrial, commercial and fixed wiring installations
- Includes all the tests required to complete the necessary electrical certification for the aforementioned electrical systems
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Suitable for conducting full single- and three-phase compliant insulation testing
- Conduct single- and three-phase RCD testing between 10mA and 1A
- New non-trip loop impedance technology
- Test 10mA type AC and A RCDs
- Prevents RCDs from influencing total loop impedance values
- Non-trip loop impedance tests can be performed in eight seconds
- Confidence Meter improves reliability: digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise
- Test EVSE RCDs
- 6mA DC test (requires OPTIONAL accessory) for testing EVSE RCDs
- Large, clear backlit display
- Digital/ analogue arc indicates fluctuating readings
- Dual digital readout: indicates the precise reading and the test parameters simultaneously
- Internal memory: capacity for 1000 readings
- Download measurements via Bluetooth
- Colour coded function controls
- No complicated screens
- No hidden menus
- Ambidextrous design: TEST and LOCK buttons on either side of the unit
- Automatic test start: frees up the user’s hands for holding probes
- Can stand independently
- Can be hung around the operator’s neck using the included neck strap
- Internal rechargeable batteries: recharge in under four hours
- Rubber over-mould for protection in tough environments
- IP54
- EN61010 CAT IV safety rated: can withstand accidental misuse and voltage transients
- Can be connected anywhere within the low voltage network on single and three-phase systems
- Visual and audible warning when hazardous voltages are detected
- Displays the voltage value when a live voltage is detected during insulation and continuity tests
- When the detected voltage exceeds a safe level testing will be stopped and a warning beep is issued
- A versatile, practical and reliable electrical tester
Calibration
Repairs
Featured Products
-
TCCPVKIT5 – Thermal Solar Installation, Survey & Test Kit
£530.00 Inc VAT: £636.00 Add to basket- Complete with equipment required for commissioning & surveying Solar PV installations
- Includes MC4 test leads, MC4 crimping tool and spanners
- Includes Thermal Camera, Multimeter, Clamp Meter, Crimp Tool, Irradiance Meter, Test Leads, Spanners & Carry Case
-
Save
34%
On RRP
SPECIAL PRICE
Fluke 1736 Three-Phase Power Logger – Gold Edition
£2,995.00 Inc VAT: £3,594.00 Add to basket- Fluke 1736/EUS Three-Phase Power Logger inc. Software
- 4x FREE Fluke 173X-flex1500 iFlexi 1500A Probes (12 inches)
- Fluke MP1-Magnetic Probe Set – Gold Edition ONLY
- Power Supply
- 4x Voltage Test Leads with Alligator Clips
- Soft Case
- Energy Analyse Plus Software
- Wi-Fi Adapter
- Line Cords
- Colour Coding Set
- USB Containing Instrument Documentation
-
Chauvin Arnoux PEL51 Power & Energy Logger
£950.00 Inc VAT: £1,140.00 Add to basket- Suitable for Single-phase installations.
- Connection via clamp without cutting off power supply
- Compact design of easy use and installation
-
Save
20%
On RRP
Chauvin Arnoux PEL103 Power & Energy Logger (inc. Clamps & Voltage Adaptor)
£2,304.80 Inc VAT: £2,765.76 Add to basket- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Voltage up to 1000V, Current up to 10,000A
- BlueTooth, Ethernet and USB communication
-
Save
20%
On RRP
Chauvin Arnoux PEL103 Power & Energy Logger
£1,528.00 Inc VAT: £1,833.60 Add to basket- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Voltage up to 1000V, Current up to 10,000A
- BlueTooth, Ethernet and USB communication
-
TCCPVKIT1 – Basic Solar Installation Kit
£155.00 Inc VAT: £186.00 Add to basket- Complete with equipment required for installation of Solar PV installations
- Includes MC4 crimping tool and spanners
- Includes Irradiance Meter & Carry Case
-
TCCPVKIT2 – Solar Installation Kit
£190.00 Inc VAT: £228.00 Add to basket- Complete with equipment required for installing Solar PV installations
- Includes Multimeter, Irradiance Meter & MC4 Test Leads
- Comes in a rugged Carry Case
-
TCCPVKIT3 – Intermediate Solar Installation & Test Kit
£240.00 Inc VAT: £288.00 Add to basket- Complete with equipment required for commissioning Solar PV installations
- Includes Clamp Meter, Irradiance Meter & MC4 test leads
- Comes in a rugged carry case
Don't Just Take Our Word For it...
Always a excellent service, sorted out my Megger fault, repaired and sent back pronto quick.Thank you
Ian Towers
1699902617
Bought my first MFT a couple of weeks ago from The Calibration Centre. Their reputation persuaded me to try them and I was looked after as well as I'd hoped. Highly recommend them and feel they will look after me for years to come.
Michael Thompson
1694278106
Ordered up a new tester and some wander leads on Thursday morning and turned up today, that’s only because of the Easter weekend. Great service as always from Paul and his staff 💯💥
Michael Halverson
1681223574
I’ve used this company a couple of times with getting testers repaired and buying testers. They are top notch. Even delivered testers next day when they knew I needed them. Brilliant service.Thanks again
Andy B
1680731447
Brilliant. Paul answered my call via a tag on a social media page for mft calibration. Very proactive. I drove the 50miles, waited 30mins and my tester was all certified. Couldn't have been easier. Great team. 👍
I W
1672918981
Excellent help and advice from Paul.
Stewart Forbes
1667726146
Absolutely the best place to send your electrical tester 🙂 such a fast turn around! Thanks Paul 🙂
Perform Electrical
1658238112
Best in the business. Always deliver above and beyond and super helpful support. Paul is a legend 👍
Jedd Feldman
1654070481
Great company, great service. They collected my PAT machines and calibrate quickly at a reasonable cost. Very nice people to speak to.
Paul S
1644406021
First class service, speedy delivery and best price around, highly recommended
Leszek Swierczynski
1643793458
I’ve been a customer of the Calibration Centre for a few years, I regularly buy test equipment and have our testers calibrated with them. Their service is top notch and always respond quickly with their deliveries.
Neil Phillips
1642673113
Excellent advice and service from Paul & the team. We have used the Calibration centre for 10 years - not had one single problem. Highly recommend!
Neil Ashton
1642521151
Can not praise this company enough, extremely helpful, really efficient and clear communication throughout my purchase.Would recommend them without any hesitation
Tom Bryan (tab246)
1642094608
Excellent service. Great communication and advice, new equipment arrived next day calibrated complete with paperwork.I would certainly recommend them.
Gavin Davies
1636650959
Great stock, Great price and even better service. The Calibration Centre were the only ones with a Megger 1741+ and EV adaptor in stock. Ordered late Tuesday delivered 10am Thursday
Graham King
1634834728
Fantastic service from Calibration Centre. Always been easy to get hold of to discuss products and my order. Have had multiple orders as well as a calibration of my Fluke MFT. All products always arrived very next day, top work
Jonathan Nunn
1631652595
We have dealt with Paul at The Calibration Centre for a few years now, the help and advice is brilliant, all deliveries and collections are very fast and everything we have ever asked for has been dealt with swiftly. We won't ever look anywhere else when it comes to MFTs or other type of electrical test instruments.Thank you yet again for another fantastic and swift service
West Coast Electrical
1631200369
Highly professional but friendly approach. Bought a new tester and couldn’t be more satisfied with the whole experience, got the tester on the very next day, fully calibrated and ready to roll. Very reasonable prices too! Will definitely use them for all the future business.
Iulian Bucinschi
1629757872
Fast, honest and very professional!!Wether it’s annual calibration or that big purchase these guys take great care of you I recommend them 100%
trevthespark
1628623625
Great service from Paul and his team, I've made a few purchases with them and always been very helpful. They even delivered my tester FOC to Belfast as they were carrying out a calibration day at the local wholesalers. Top job! Highly recommend.
N Brown Electrical
1617953243
Great service, quick dispatch
Rob Turnbull
1617296898
They have been calibrating my kit now for 20 years, always good service.
robert bryant
1615639699
Bobs Google Private
1615200862
This was the most seamless and professional buying experience, got me sorted as soon as possible. Will definitely be going back!
Noel Swinn
1614785533
Great customer service and fast delivery, really pleased with my new tester and kit! Thanks a million!
Richard Fort
1614205281
Request a Quote on Your Order
Want to enquire about an order? Get in touch with one of our dedicated team.
