01785 600 691enquiries@thecalcentre.co.uk

Save

48%

On RRP

Kewtech KT66EV Multifunction Tester & KEWEVA Adapter Kit

£1,250.00 Inc VAT: £1,500.00

    4 in stock (can be backordered)

    Calibration Certificate

    Add a 12 month Calibration Certificate

    Description

    Kewtech KT66EV EVA Kit

    The Kewtech KT66EV EVSE Kit combines a KT66DL 12 in 1 multifunction tester and KEWEVA EVSE adapter to provide a comprehensive kit for all installation testing, especially those with electrical vehicle charging points. Whether these are installed with Type B RCD’s or with 6mA residual direct current devices and in either TN or TT configurations, this kit gives you the flexibility to test for electrical safety as well as EVSE functionality.

    Watch the video, where Paul from Kewtech gives an excellent demonstration of the KT66DL’s main features

    Engineered with a pioneering, sophisticated loop testing system, including 3 & 2 wire low current test options and a comprehensive RCD testing facility complete with EV charging point test capacity, the KT66DL has it all. As important as its illustrious list of features, the KT66DL exhibits all the hallmarks of Kewtech’s quality, reliability and ease of use, so vital to the everyday contractor, all of which can be seen in its extra-large colour screen display.

    • User interface: Easy to use single rotary dial with four function softkeys and colour LCD 3.5” dot matrix display.
    • ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no tripLOOP L-PE testing on all RCDs. 2 wire only option is very
      useful in case of no neutral (i.e. 3-phase motor lines & testing at switch points for lighting circuits).
    • Loop: High test current range of 2R with 0.001R resolution.
    • Zs Limit: Compares the values required by Electrical Installations Standard (BS7671- 18th Edition) with measured results.
    • 55V Loop: Low and high current loop test of 110V CTE circuits
    • RCD: Type AC, A, F, B (General & Selective), EV and Variable RCDs. Single, auto, ramp and contact voltage options. All auto
      test results displayed on one screen.
    • Earth: Earth resistance test 2 and 3 wires option.
    • Insulation: Resistance test 100, 250, 500 & 1000V with auto discharge voltage.
    • Continuity: Continuity test at 200mA or 15mA with selectable buzzer for fast judgment.
    • Phase rotation: On 3-phase lines with clear indication of the sequence on the display.
    • Volts: TRMS Voltage measurements 2-600V, Mains Frequency.
    • SPD: Surge Protection Device test, for SPD that uses varistor.
    • PAT: Portable Appliance Tester function, for insulation and protective conductor resistance test.
    • Advanced memory: Assigns type of test (eg: R2 or R1+R2 for continuity), circuit number and DB to test results
    • Touch voltage: Selectable
    • Documentation: End of line calibration certificate and manual
    • Help: Display shows how to connect the instrument according to the function selected.
    • Protection: Supplied in heavy duty soft carry case and the instrument has a lid.
    • SAFETY: IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,7,10

    KT66Dl Features graphic

    Kewtech also make your life easier with: Large colour dot matrix display giving relevant information simultaneously, for instance all auto-tests on one screen. There are three ways to test, single press of the test button, lockdown test button for continuous testing or by using the test button in the additional test probe. The instrument has a lid for extra protection and comes with Kewtech’s popular G7 test leads. A robust soft carry case with extra room for testing accessories and a printed manual with end of line calibration certificate is included.

    What’s Included?

    • Kewtech KT66DL 12-in-1 Multifunction Tester
    • Kewtech KEWEVA EVSE Adapter
    • Kewtech ACC064SP G7 Test Probe with Remote Test Button
    • Kewtech ACC065 G7 Test Lead Set
    • Batteries
    • Software
    • Kewtech Kamp 12 Mains Lead
    • Test Lead Pouch
    • Soft Carry Case
    • USB Cable
    • Padded Strap
    • Instruction Manual
    • Calibration Certificate

    • ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
      LOOP L-PE testing on all RCDs
    • Loop: High test current range of 2R with 0.001R resolution
    • RCD: Type AC, A, F, B (General & Selective), EV and Variable
      RCDs
    • Large colour dot matrix display
    • all auto-tests on one screen
    • three ways to test
    • lockdown test button for continuous testing
    • lid for extra protection
    • comes with Kewtech’s popular G7 test leads
    • A robust soft carry case with extra room for testing accessories
    • printed manual with end of line calibration certificate is included

    Kewtech KT66DL 12-in-1 Multifunction Tester Technical Specifications

    Loop Impedance

    Range20.00/200.0/2000Ω (auto-ranging)
    Display range0.00 – 20.99Ω / 16.0 – 209.9Ω / 160 – 2099Ω
    Measuring range0 – 2000Ω
    Accuracy±2.0%rdg±8dgt
    Open-circuit voltage7 – 14V DC
    Test current200mA test: 200mA or more (2Ω or less)
    15mA test: 15mA±3mA (short-circuit)
    Note• Enabled if pre-set NULL value is 9Ω or less.

    • Buzzer: Buzzer sounds when measured resistance is 2Ω or less.

    Volts

    Range300.0/600V (Auto-ranging)
    Display rangeVoltage: 2.0 – 314.9V, 240 – 629V
    Frequency: 40.0 – 70.0Hz (displayed at 2V or higher)
    Measuring.rangeVoltage: 2 – 600V
    Frequency: 45 – 65Hz
    AccuracyVoltage: ±2%rdg±4dgt
    Frequency: ±0.5%rdg±2dgt

    Uc (RCD)

    Mains voltage range100-260V
    Range100V
    Display range0.0 – 104.9V
    Measuring range0 – 100V
    Accuracy+5%to+15%rdg ±8dgt 230V
    Test current50 % or less of IΔn

    Earth

    Precise measurementSimplified measurement
    Range20.00 / 200.0 / 2000Ω (auto-ranging)
    Accuracy20Ω range; ±2%rdg±0.08Ω
    The other ranges: ±2%rdg±3dgt
    (Aux. earth resistance: 100Ω)
    ±2%rdg±0.08Ω
    The other ranges: ±2%rdg±3dgt
    Output current20Ω range: approx. 3mA, 200v range: approx. 1.7mA
    2000Ω range: approx. 0.7mA Frequency: 825Hz

    Phase Rotation

    Measuring Range48 – 600V / 45 – 65Hz
    Criteria of judgementCorrect sequence: Clockwise symbol and “1, 2, 3” are displayed.
    Reversed sequence: Counter-clockwise symbol and “3, 2, 1” are displayed.

    Insulation

    Rated voltage100V250V500V1000VSPD (Varistor) 1000V
    Range2.000/20.00/200.0MΩ
    auto-ranging
    20.00/200.0/1000MΩ
    auto-ranging
    20.00/200.0/2000MΩ0 -1000V (increases in 1V steps)
    Display range0.000 – 2.099MΩ0.00 – 20.99MΩ0.00 – 20.99MΩ1049V
    1.60 – 20.99MΩ16.0 – 209.9MΩ16.0 – 209.9MΩ
    16.0 – 209.9MΩ160 – 1049MΩ160 – 2099MΩ
    Measuring range0 – 200MΩ0 – 1000MΩ0 – 2000MΩ0 – 1049V
    Accuracy2.000MΩ range: ±2%rdg±6dgt20.00MΩ range: ±(2%rdg+6dgt), 200.0MΩ range: ±(2%rdg+6dgt)±5%rdg±5dgt
    20.00MΩ range: ±2%rdg±6dgt1000MΩ range: ±(5%rdg+6dgt)2000MΩ range: ±(5%rdg+6dgt)
    200MΩ range: ±5%rdg±6dgt
    Rated meas.
    current
    1.0 – 1.2mA
    at 100kΩ
    1.0 – 1.2mA
    at 250kΩ
    1.0 – 1.2mA
    at 500kΩ
    1.0 – 1.2mA
    at 1MΩ
    1.0 mA

    Loop

    FunctionLOOP ATTLOOP HIGH
    3-Wire L-PE2-Wire L-PEL-PE0.01ΩResL-PE0.001ΩResL-N/L-L
    Mains input
    voltage range
    100 – 260V 50/60Hz
    (L-N < 20Ω)
    48 – 260V 50/60Hz100 – 260V 50/60Hz48 – 260V 50/60Hz
    RangeLOOP20.00/200.0/2000Ω (auto-ranging)20.00/200.0/2000Ω2.000Ω20.00Ω
    PFC/PSC2000A/20kA2000A/20kA (PFC only)2000A/50kA (PFC only)2000A/20kA (PSC only)2000A/20kA (PSC only)
    Display rangeLOOP0.00 – 20.99Ω
    21.0 – 209.9Ω
    210 – 2099Ω
    0.00 –20.99Ω
    21.0 –209.9Ω
    210 –2099Ω
    0.00 – 20.99Ω
    21.0 – 209.9Ω
    210 –2099Ω
    0.000 – 2.099Ω0.00-20.99Ω
    PFC/PSC0 – 2099A
    2.10 – 20.99kA
    0 – 2099A
    2.10 – 20.99kA
    (PFC only)
    0 – 2099A
    2.10 – 50.49kA
    (PFC only)
    0 – 2099A
    2.10 – 20.99kA
    (PFC only)
    0 – 2099A
    2.10 – 20.99kA
    (PSC only)
    Meas. rangeLOOP0 – 2000Ω0 – 2000Ω0 – 2000Ω0 – 2Ω0 – 20
    AccuracyLOOP±(3%rdg+6dgt)±(3%rdg+10dgt)±(3%rdg+4dgt)±(3%rdg+25mΩ)±(3%rdg+4dgt)
    PFC/PSCDepending on the accuracies of voltage and LOOP measurements
    Test current @ 230VL-N:6A/60ms
    N-PE:10mA (5.3Hz)
    L-PE: 15mA20Ω: 6A/20ms,
    200Ω: 0.5A/20ms
    2000Ω: 15mA/500ms
    25A/20ms6A/20ms

    RCD

    ModeRated residual operating current (mA)(IΔn)Test currentDuration
    Current (mA) rmsAccuracy @230VMeas. timeAccuracy
    x 1/2ACG: 10/30/100/300/500/1000 S: 100/300/500IΔn×1/2-8% to-2% VAR:-10% to 0%2000msTrip Time
    ±(1%+2ms)
    Measuring
    time
    ±3% of FS
    A/FG: 10/30/100/300/500 AS:100/300/500IΔn×1/2-10% to 0%
    BG: 10/30/100/300 S:100/300IΔn×1/2-10% to 0%
    x 1ACG:10/30/100/300/500/1000 S: 100/300/500IΔn+2% to +8% VAR:0% to +10%G:550ms
    S:1000ms
    A/FG: 10/30/100/300/500 AS:100/300/500IΔn×1.4 (10mA: IΔn×2)0% to +10%
    BG: 10/30/100/300 S:100/300IΔn×20% to +10%
    6 mA DCIΔn0% to +10%10.5s
    x 5ACG: 10/30/100 S: 100IΔn×5+2% to +8% VAR:0% to +10%410ms
    A/FG: 10/30/100 AS: 100IΔn×5×1.40% to +10%
    B10/30IΔn×2×50% to +10%
    Ramp
    20 to 110%
    AC10/30/100/300/500 S: 100/300/500IΔn-4% to +4%by 10%
    G: 300ms
    S: 500ms
    Measuring
    time
    ±3% of FS
    A/FG: 10/30/100/300/500 AS:100/300/500IΔn×1.4 (10mA:IΔn×2)-10% to +10%
    BG: 10/30/100/300 S: 100/300IΔn×2-10% to +10%by 2% /150ms
    Ramp EV 30 to 100%6 mA DCIΔn-10% to +10%by 2% / 500ms

    General Specifications

    Applicable StandardsIEC 61010-1 CATIII (600V) CATIV (300V) pollution degree 2, IEC 61010 -Tester , -2-030, -2-034,
    IEC61557-1,2,3,4,5,6,7,10, IEC 60529 IP40, EN 61326-2-2 (EMC)
    Dimensions & Weight136 (L) x 235(W) x 114 (D) mm, 1300g including batteries (8 x AA / LR6)

    Kewtech KEWEVSE EVSE Adapter Technical Specifications

    Input voltageMax. 250V (single-phase), max. 430V (three-phase) 50/60Hz
    Measurement CategoryCAT II 300V
    Mains socket rating250V/10A
    Mains socket protectionFuse T10A/250V
    PP simulationOpen circuit, 13A, 20A, 32A, 63A
    CP simulationStates A, B, C, D
    Error simulationCP error “E”, PE (earth fault) error
    PE Pre-TestYes
    Test connector typeIEC62196-2 Type 2 male
    Test cable length25cm
    Working temperature0 … +40ºC
    Storage temperature-10 … +50ºC
    Humidity0-80% RH

    KT66DL Datasheet

    KT66DL Datasheet