Showing 1–12 of 22 results
-
Save
33%
On RRP
Amprobe EV-520-UK Vehicle Charging Station Test Adapter Kit
- Separate phase indication by three LED lamps for easy check if voltage is present.
- Perform safety and functional tests, while simulate presence of an electrical vehicle
- Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector various charging states can be simulated
£883.00 £591.61 Inc VAT: £709.93
Add to basket -
Save
57%
On RRP
DiLog DL9130 EVPV Kit (MFT/EV/PV Tester)
- Complete kit, includes DL9130 MFT, EV Adaptor & Solar Kit
- EV Auto RCD Sequence - 6mA RDC-DD for EV Testing
- Cheapest full EVPV test kit currently available!
- Type AC, A, B & Selective RCDs
- Variable RCD Test
- Rmax and Zmax Feature
- Intelligent Auto Sensing High
- Current 2 & 3 Wire Loop Test
- New Colour Changing RGB Display
- Selectable 15/200mA Continuity Test
- Remote Test Probe
- Full UKAS Calibration Certificate
£2,328.00 £999.00 Inc VAT: £1,198.80
Add to basket -
Save
53%
On RRP
DiLog DL9130 Multifunction Tester & DLEV1 Adapter Kit
- Complete kit, includes DL9130 MFT & EV Adaptor
- EV Auto RCD Sequence - 6mA RDC-DD for EV Testing
- Cheapest full EV test kit currently available!
- Type AC, A, B & Selective RCDs
- Variable RCD Test
- Rmax and Zmax Feature
- Intelligent Auto Sensing High
- Current 2 & 3 Wire Loop Test
- New Colour Changing RGB Display
- Selectable 15/200mA Continuity Test
- Remote Test Probe
- Full UKAS Calibration Certificate
£1,998.00 £945.00 Inc VAT: £1,134.00
Add to basket -
Save
36%
On RRP
FLUKE 1664FC Amprobe EV-520-UK EVSE KIT
- Auto test function - ability to perform a set sequence of tests
- Fluke Connect - wirelessly interface with smartphones/tablets & computers
- Full EV test with the included Amprobe Ev Adaptor
- Separate phase indication by three LED lamps for easy check if voltage is present
- Mains socket offering the possibility to connect an external load to check if the electric power meter works and counts in the right manner
- EV-connectors for type 2 and type 1
£2,200.00 £1,399.00 Inc VAT: £1,678.80
Add to basket -
Save
32%
On RRP
Kewtech KEWEVA EV Charge Point Testing Adapter
- CP Error auto-check for faster testing
- Uses standard 4 mm connectors rated at 10 A for testing purposes
- Works with any MFT with EV charging point testing capabilities
- Direct low-resistance connections for highly accurate results
- Suitable for single & three-phase charging equipment
- Red LEDs indicate the live status per phase
- Incorporates an IEC 62196-2 type 2 connector for EV charging units
- Single rotary dial controls the CP status simulation: standby, ready & charging
- Checks the charging station's PWM signal is at 1 Khz, confirmed by a blue LED
- Separate RED LED indicates when voltage is applied to output connectors
- Supplied with durable carry case
£515.00 £350.00 Inc VAT: £420.00
Add to basket -
Save
44%
On RRP
Kewtech KEWEVSE EVSE Adapter
- Enables electrical safety testing of electric
vehicle charging points compatible with any
EVSE testing equipment
- 4 mm connectors and alternative BS1363
socket for connecting your tester
- For testing domestic and commercial
EV charging equipment
- CP & PP state adjustment rotary switches
- PE error & CP error simulation test
- Oscilloscope output
- Carry case included
- Printed manual
- Compact
- Easy to use
£715.00 £399.00 Inc VAT: £478.80
Add to basket -
Save
47%
On RRP
Kewtech KT66EV Multifunction Tester & EV Adapter Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,495.00 £1,329.00 Inc VAT: £1,594.80
Add to basket -
Save
48%
On RRP
Kewtech KT66EV Multifunction Tester & KEWEVA Adapter Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,395.00 £1,250.00 Inc VAT: £1,500.00
Add to basket -
Save
34%
On RRP
Megger EVCA210-UK Electric Vehicle Charge-Point Adapter
- Use with a single or multifunction tester to verify the functionality and safety of EV charge points
- Suitable for checking single- and three-phase EV charge points
- Maintain compliance with IEC/ EN 61851-1 and IEC/ HD 60364-7-722
- Mains socket
- 4mm connection points: L1, L2, L3, N and PE
- CP signal terminals for connecting an oscilloscope to measure CP signals
- Fully test Mode 3 AC electric vehicle charge points
- Compliant with UK, European and other international wiring regulations
- Compliant with the Low Voltage Directive LVD 2014/35
- Type 2 connector for testing charging points with panel-mounted sockets or a fixed cable with a vehicle connector
- Type 1 connector for checking charging points with a fixed type 1 cable connector, such as those found on a Mitsubishi PHEV
- Simulates the connection of an EV to the charging point
- PP charging state simulation
- CP charging state simulation
- Rotary switch
- Push-button for CP Error “E” simulation
- Push-button for PE Error (Earth Fault) simulation
- Push-button for PE Pre-Test
- IP54
- CAT II 300V
- Ergonomic and easy-to-use adapter specifically designed for testing the safety and effectiveness of EV charging points
£550.00 £365.00 Inc VAT: £438.00
Add to basket -
Save
10%
On RRP
Megger EVCC300-UK Electric Vehicle Charge-Point Checker
- Checks mode 2 and single phase mode 3 (level 1 and two phase level 2) chargers
- Checks chargers with SAE J1772 Type 1 and Type 2 connectors
- Performs four EV charger safety checks
- Performs four EV charger operation checks
- Checks to see if nuisance tripping or RCD/GFCI is likely to occur
- Reads control pilot state response from EV Charger to IEC61852
£675.00 £607.50 Inc VAT: £729.00
Add to basket -
Save
40%
On RRP
Megger MFT-X1 Multifunction Tester & EVCA210 Kit
- Designed for testing EVSE Installations
- Automatic test sequences for EVSE RCDs
- Confidence Meter: indicates the confidence in the accuracy of the loop impedance result
- Troubleshoot and verify the installation and safety of industrial, commercial and fixed wiring installations
- Includes all the tests required to complete the necessary electrical certification for the aforementioned electrical systems
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Suitable for conducting full single- and three-phase compliant insulation testing
- Conduct single- and three-phase RCD testing between 10mA and 1A
- New non-trip loop impedance technology
- Test 10mA type AC and A RCDs
- Prevents RCDs from influencing total loop impedance values
- Non-trip loop impedance tests can be performed in eight seconds
- Confidence Meter improves reliability: digital ARC indicates the analytical process, and the measurement is continually monitored and adjusted in reference to the circuit noise
- Test EVSE RCDs
- 6mA DC test (requires OPTIONAL accessory) for testing EVSE RCDs
- Large, clear backlit display
- Digital/ analogue arc indicates fluctuating readings
- Dual digital readout: indicates the precise reading and the test parameters simultaneously
- Internal memory: capacity for 1000 readings
- Download measurements via Bluetooth
- Colour coded function controls
- No complicated screens
- No hidden menus
- Ambidextrous design: TEST and LOCK buttons on either side of the unit
- Automatic test start: frees up the user’s hands for holding probes
- Can stand independently
- Can be hung around the operator’s neck using the included neck strap
- Internal rechargeable batteries: recharge in under four hours
- Rubber over-mould for protection in tough environments
- IP54
- EN61010 CAT IV safety rated: can withstand accidental misuse and voltage transients
- Can be connected anywhere within the low voltage network on single and three-phase systems
- Visual and audible warning when hazardous voltages are detected
- Displays the voltage value when a live voltage is detected during insulation and continuity tests
- When the detected voltage exceeds a safe level testing will be stopped and a warning beep is issued
- A versatile, practical and reliable electrical tester
£2,840.00 £1,715.00 Inc VAT: £2,058.00
Add to basket -
Save
47%
On RRP
Megger MFT1741 PLUS Multifunction Tester EVCA210-UK EV EVSE KIT
- Troubleshoot and verify the functionality and safety of industrial, commercial and domestic fixed wiring installations
- Check EV charge points using the Megger EVCA210-UK (see below)
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Includes all the tests required to complete the relevant electrical certification
- Please see the table above for an overview of the MFT1741 ’s testing capabilities
- Visual and audible hazardous voltage indicators
- Stops testing if a hazardous voltage is detected during insulation and continuity tests
- NEW non-trip loop impedance technology
- NEW confidence meter
- NEW auto sequence for EV charge point RCDs
- Large, clear, backlit, dual-readout display
- Readings and test parameters are displayed in parallel
- Digital/ analogue arc for indicating fluctuating readings
- Colour-coded function controls
- Function controls reduce the possibility of selecting the incorrect function or range
- Does NOT include hidden or complicated measurement menus
- Ambidextrous design: TEST and LOCK functions on either side
- Automatic test start supports hands-free operation
- Supplied with a neck strap
- Stands independently
- IP54
- Powered by internal rechargeable batteries
- Approximate battery life: four hours
- Easy-to-use and ergonomic test instrument with an eclectic array of test functions
£2,549.00 £1,345.00 Inc VAT: £1,614.00
Add to basket