Special Offers
Showing 1–16 of 36 results
-
Save
33%
On RRP
Amprobe SOLAR-100 Solar Power Meter
Original price was: £242.00.£162.14Current price is: £162.14. Inc VAT: £194.57 Add to basket- Portable meter for measuring solar power and transmission
- Includes flexible sensor attached via coiled cable
- Convenient, easy-to-read display
- Selectable measurement units - choose between W/m² or BTU
- Data hold function temporarily freezes values on screen
- MAX/MIN mode calculates the maximum/minimum values taken over a period of time
-
Save
20%
On RRP
Chauvin Arnoux PEL103 Power & Energy Logger
Original price was: £1,910.00.£1,528.00Current price is: £1,528.00. Inc VAT: £1,833.60 Add to basket- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Voltage up to 1000V, Current up to 10,000A
- BlueTooth, Ethernet and USB communication
-
Save
20%
On RRP
Chauvin Arnoux PEL103 Power & Energy Logger (inc. Clamps & Voltage Adaptor)
Original price was: £2,881.00.£2,304.80Current price is: £2,304.80. Inc VAT: £2,765.76 Add to basket- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Voltage up to 1000V, Current up to 10,000A
- BlueTooth, Ethernet and USB communication
-
Save
20%
On RRP
Chauvin Arnoux PEL103 Power & Energy Logger (inc. Clamps)
Original price was: £2,660.00.£2,128.00Current price is: £2,128.00. Inc VAT: £2,553.60 Add to basket- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Voltage up to 1000V, Current up to 10,000A
- BlueTooth, Ethernet and USB communication
-
Save
20%
On RRP
Chauvin Arnoux PEL104 WiFi Power & Energy Logger
Original price was: £2,432.00.£1,945.60Current price is: £1,945.60. Inc VAT: £2,334.72 Add to basket- Five built-in communication interfaces: USB, Ethernet, Bluetooth, Wi-Fi, and 3G/GPRS
- Measures and logs the parameters required for energy consumption diagnostics
- Android application: monitor the PEL104 and modify its configuration remotely
- Compact and comprehensive instrument
- Four voltage inputs
- Three current inputs
- Measure and monitor all types of electrical networks: single-, split-, and three-phase systems
- Monitor circuits without cutting off the mains power supply
- Supplied with MA194-350 MiniFlex Clamps
- RMS and DC measurements (50Hz, 60Hz, and 400Hz) with 128 samples/cycles simultaneously on each phase
- Analogue readings
- Measure and characterise electric motors
- Measurements are conducted as per the IEEE 1459 standard
- Calculate total harmonic distortion for currents and voltages
- Breakdown of energy losses
- Voltage and current ratios facilitate the PEL104’s wide measurement range
- AC/DC voltage up to 1000V
- Current up to 10kA AC or 5kA DC
- Power (active, apparent, and reactive): 10 W/var/VA to 10 GW/Gvar/GVA
- Energy: 4 EWh/ 4 EVAh/ 4 EVarh
- Total energy (4 quadrants)
- Phase data: cos φ, tan Φ, power factor (PF)
- Harmonics up to the 50th order
- Crest factor
- Alarm mode with user-defined limits, an events log, and an email alert
- Measurements and calculations are recorded to the SD card
- SD card can store several years’ worth of data
- Supports continuous monitoring with a logging interval of 200ms per measurement
- Use PEL Transfer Software to analyse data, decompose the losses detected, and calculate the cost of power consumption
- Use DataView Software to create customised reports
- Portable
- Rugged
- Magnetised casing
- Self-powers via a voltage input (up to 600V)
- IP54
- Easy-to-read, backlit, triple display with an LCD screen
- Automatically recognises the type of sensor connected
- A compact, comprehensive, and convenient solution to monitoring and optimising energy efficiency
-
Save
20%
On RRP
Chauvin Arnoux PEL104 WiFi Power & Energy Logger – Pro Kit
Original price was: £2,995.00.£2,396.00Current price is: £2,396.00. Inc VAT: £2,875.20 Add to basket- Five built-in communication interfaces: USB, Ethernet, Bluetooth, Wi-Fi, and 3G/GPRS
- Measures and logs the parameters required for energy consumption diagnostics
- Android application: monitor the PEL104 and modify its configuration remotely
- Compact and comprehensive instrument
- Four voltage inputs
- Three current inputs
- Measure and monitor all types of electrical networks: single-, split-, and three-phase systems
- Monitor circuits without cutting off the mains power supply
- Supplied with MA194-350 MiniFlex Clamps
- RMS and DC measurements (50Hz, 60Hz, and 400Hz) with 128 samples/cycles simultaneously on each phase
- Analogue readings
- Measure and characterise electric motors
- Measurements are conducted as per the IEEE 1459 standard
- Calculate total harmonic distortion for currents and voltages
- Breakdown of energy losses
- Voltage and current ratios facilitate the PEL104’s wide measurement range
- AC/DC voltage up to 1000V
- Current up to 10kA AC or 5kA DC
- Power (active, apparent, and reactive): 10 W/var/VA to 10 GW/Gvar/GVA
- Energy: 4 EWh/ 4 EVAh/ 4 EVarh
- Total energy (4 quadrants)
- Phase data: cos φ, tan Φ, power factor (PF)
- Harmonics up to the 50th order
- Crest factor
- Alarm mode with user-defined limits, an events log, and an email alert
- Measurements and calculations are recorded to the SD card
- SD card can store several years’ worth of data
- Supports continuous monitoring with a logging interval of 200ms per measurement
- Use PEL Transfer Software to analyse data, decompose the losses detected, and calculate the cost of power consumption
- Use DataView Software to create customised reports
- Portable
- Rugged
- Magnetised casing
- Self-powers via a voltage input (up to 600V)
- IP54
- Easy-to-read, backlit, triple display with an LCD screen
- Automatically recognises the type of sensor connected
- A compact, comprehensive, and convenient solution to monitoring and optimising energy efficiency
-
Save
20%
On RRP
Chauvin Arnoux PEL104 WiFi Power & Energy Logger (inc. Clamps)
Original price was: £2,838.00.£2,270.40Current price is: £2,270.40. Inc VAT: £2,724.48 Add to basket- Five built-in communication interfaces: USB, Ethernet, Bluetooth, Wi-Fi, and 3G/GPRS
- Measures and logs the parameters required for energy consumption diagnostics
- Android application: monitor the PEL104 and modify its configuration remotely
- Compact and comprehensive instrument
- Four voltage inputs
- Three current inputs
- Measure and monitor all types of electrical networks: single-, split-, and three-phase systems
- Monitor circuits without cutting off the mains power supply
- Supplied with MA194-350 MiniFlex Clamps
- RMS and DC measurements (50Hz, 60Hz, and 400Hz) with 128 samples/cycles simultaneously on each phase
- Analogue readings
- Measure and characterise electric motors
- Measurements are conducted as per the IEEE 1459 standard
- Calculate total harmonic distortion for currents and voltages
- Breakdown of energy losses
- Voltage and current ratios facilitate the PEL104’s wide measurement range
- AC/DC voltage up to 1000V
- Current up to 10kA AC or 5kA DC
- Power (active, apparent, and reactive): 10 W/var/VA to 10 GW/Gvar/GVA
- Energy: 4 EWh/ 4 EVAh/ 4 EVarh
- Total energy (4 quadrants)
- Phase data: cos φ, tan Φ, power factor (PF)
- Harmonics up to the 50th order
- Crest factor
- Alarm mode with user-defined limits, an events log, and an email alert
- Measurements and calculations are recorded to the SD card
- SD card can store several years’ worth of data
- Supports continuous monitoring with a logging interval of 200ms per measurement
- Use PEL Transfer Software to analyse data, decompose the losses detected, and calculate the cost of power consumption
- Use DataView Software to create customised reports
- Portable
- Rugged
- Magnetised casing
- Self-powers via a voltage input (up to 600V)
- IP54
- Easy-to-read, backlit, triple display with an LCD screen
- Automatically recognises the type of sensor connected
- A compact, comprehensive, and convenient solution to monitoring and optimising energy efficiency
-
Chauvin Arnoux PEL51 Power & Energy Logger
£950.00 Inc VAT: £1,140.00 Add to basket- Suitable for Single-phase installations.
- Connection via clamp without cutting off power supply
- Compact design of easy use and installation
-
Save
57%
On RRP
DiLog DL9130 EVPV Kit (MFT/EV/PV Tester)
Original price was: £2,328.00.£999.00Current price is: £999.00. Inc VAT: £1,198.80 Add to basket- Complete kit, includes DL9130 MFT, EV Adaptor & Solar Kit
- EV Auto RCD Sequence - 6mA RDC-DD for EV Testing
- Cheapest full EVPV test kit currently available!
- Type AC, A, B & Selective RCDs
- Variable RCD Test
- Rmax and Zmax Feature
- Intelligent Auto Sensing High
- Current 2 & 3 Wire Loop Test
- New Colour Changing RGB Display
- Selectable 15/200mA Continuity Test
- Remote Test Probe
- Full UKAS Calibration Certificate
-
Save
38%
On RRP
Fluke 1736 Three-Phase Power Logger – Gold Edition
Original price was: £4,505.00.£2,795.00Current price is: £2,795.00. Inc VAT: £3,354.00 Add to basket- Fluke 1736/EUS Three-Phase Power Logger inc. Software
- 4x FREE Fluke 173X-flex1500 iFlexi 1500A Probes (12 inches)
- Fluke MP1-Magnetic Probe Set – Gold Edition ONLY
- Power Supply
- 4x Voltage Test Leads with Alligator Clips
- Soft Case
- Energy Analyse Plus Software
- Wi-Fi Adapter
- Line Cords
- Colour Coding Set
- USB Containing Instrument Documentation
-
Fluke 3140R Clip On Current Transformer
£599.00 Inc VAT: £718.80 Add to basket- CT Type – Clamp On
- Current Range – 2 to 400Amps
- Accuracy – 2 percent RDG +/- 0.04 Amps
- Frequency Response – 20 KiloHertz
- Jaw Opening – 3.2 centimeters (1.25 inches)
-
Fluke BP1730 Li-Ion Battery Pack 3.7V
£54.00 Inc VAT: £64.80 Add to basket- Li Ion Battery Pack for the Fluke 1730
- Voltage: 3.7V
- Milliamps-per-hour: 2500mAh
-
Save
25%
On RRP
Fluke IRR1-SOL Irradiance Meter
Original price was: £396.00.£297.00Current price is: £297.00. Inc VAT: £356.40 Add to basket- An all-in-one, easy-to-use tool for installing, testing, and maintaining solar panels and photovoltaic systems
- Measure the irradiance, temperature, inclination, and direction of solar arrays
- A high-precision mono-crystalline solar sensor
- Instantaneous irradiance measurements up to 1400 W/m²
- Built-in temperature sensor and external suction mount temperature probe measure ambient and panel temperature
- Integrated compass
- Inclination sensor
- High-contrast LCD screen that is easy-to-read even in direct sunlight
- Rugged, compact design
- Protective carrying case
- Simple user interface
- Supports single-handed operation
- Meet IEC 62446-1 requirements for testing, documenting, and maintaining photovoltaic systems
- Ideal for solar installers and technicians working on roof-mounted systems or large-field installations
-
Fluke MP1 Magnet Probes
£125.00 Inc VAT: £150.00 Add to basket- Magnetic Probes Tips
- Set of 4
- For 4MM Banana
- Very useful for control system monitoring
- No need to disconnect wiring or use cumbersome clip leads
-
Save
10%
On RRP
Fluke VR1710 Single-Phase Voltage Quality Recorder
Original price was: £1,144.00.£1,029.60Current price is: £1,029.60. Inc VAT: £1,235.52 Add to basket- Plugs directly into a mains socket and monitors voltage quality
- Monitor trends, dropouts and power quality
- Easy to use
- Continuous recording
- Graphical summary of data and quick overview of problems
- Records for up to 339 days
- MIN/MAX/AVG value calculation
- Actual transient display
- Flicker recording
- Individual harmonics and THD value recording
- Statistical analysis of single phase voltage events
- Compatible with PowerLog software (included)
-
Save
37%
On RRP
Kewtech 6315 Power Quality Analyser
Original price was: £4,700.00.£2,980.00Current price is: £2,980.00. Inc VAT: £3,576.00 Add to basket- Simultaneous power and power quality measurements - calculate power, harmonics, waveform and power quality simultaneously
- 3 voltage channels and 4 current channels
- Helpful support functions - quick start guide, wiring check and sensor detection
- Guaranteed high accuracy measurements in compliance with IEC 61000-4-30 Class S and EN50160
- Remote monitoring on PC and Android devices - remote checking via Bluetooth communication and store data on the included SD card
- Compatible with various clamp sensors with range from 1000mA up to 3000A (plus earth leakage)
- Energy consumption check on site with trend and demand graphs
- High quality full colour TFT display with high resolution
- IEC 61010-1 compliant
- CAT IV 300, CAT III 600V and CAT II 1000V rated
