01785 600 691enquiries@thecalcentre.co.uk




Chauvin Arnoux PEL103 Power & Energy Logger (inc. Clamps)

Original price was: £2,660.00.Current price is: £2,128.00. Inc VAT: £2,553.60

    Calibration Certificate

    Add a 12 month Calibration Certificate


    Chauvin Arnoux PEL103 Power & Energy Logger – inc. MA194 Clamps


    The Chauvin Arnoux PEL103 Power Energy Logger is designed to measure and record the consumption of electrical installations in order to improve energy efficiency and reduce costs. Featuring a backlit 4-line LCD capable of clearly displaying readings in real-time.

    • Suitable for use on single-phase, split-phase and three-phase installations
    • Can be installed without cutting off the mains power supply
    • Map the electrical consumption on a site
    • Gain a real-time snapshot of consumption
    • Analyse electrical network quality
    • Record harmonics up to the 50th order with phase indication
    • Record results to an SD card
    • Real-time communication with a PC
    • Data transfer and analysis with supplied PEL software
    • MA194 Mini-Clamps INCLUDED with this product


    Installation of the instrument can be performed without having to open the electrical network, while the magnetic panel on the rear and slim design allow the PEL103 to be quickly mounted onto all electrical cabinets even when the door is closed. Measurements are then performed using 3 additional current sensors and voltage inputs allowing the logger to record all electrical parameters including RMS frequency, voltage, current, power values and power factor. With this data the energy efficiency of your electrical distribution system can be continually monitored and optimised.

    The Chauvin Arnoux PEL103 provides real-time consumption readings that can be measured and compared against previous recordings, allowing users to easily target areas where a distribution system is performing poorly. This also makes it simple to make modifications and measure their impact.

    The PEL103 Power Energy Logger can also be installed in an electrical cabinet for extended periods to continuously monitor the active, apparent and reactive power values. It will instantly detect whenever the subscribed power threshold is exceeded, alerting users to overconsumption and an increase in energy bills.

    The Chauvin Arnoux PEL103 is ideal for monitoring energy consumption within the industrial and building sectors as well as on general distribution boards that are used by local authorities to control street lighting for example.

    PEL Transfer software is included for results transfer from the power energy logger to a PC. Once transferred, readings can be displayed in both tables and graphs for further analysis. The PEL software can also acquire real-time recordings from the logger, configure the unit and verify connections before you take measurements.

    Unsure of which to purchase? Compare features here:

    PEL 102PEL 103PEL 104PEL 106
    Installation TypeSingle-phase, split-phase, three-phase (with or without neutral)
    Number of Channels4V & 3A with calculated nutral current5V & 4A
    Acquistion Speed1s1s200ms200ms
    Calculated PowersP, Q & SP, Q & SP, N, S, Q1 & DP, N, S, Q1 & D
    Total or Partial Energy✔✔✔✔
    Display by Quadrants✔✔✔✔
    Energy Cost Calculation✔✔✔✔
    Energy Lost Calculation✔✔
    Motor Rotation Speed✔✔✔✔
    Motor Torque✔✔✔✔
    Motor Efficiency✔✔✔✔
    Bluetooth, Ethernet & USB✔✔✔✔
    4-Line Backlit LCD Screen✔✔✔
    3G & GPRS✔✔
    Alarms/Reports by Email✔✔
    Max. SD Card Memory32Gb32Gb32Gb32Gb
    Self Powering AdaptorOptionalOptionalIncludedBuilt-In
    External Analogue Inputs8 using L4528 using L452
    Ingress ProtectionIP54IP54IP54IP67

    Chauvin Arnoux PEL103 Power & Energy Logger Key Features

    • Transportable – take the PEL103 where you need to carry out measurements
    • Compatible – the PEL103 is designed to integrate directly into single phase, split phase, three phase and other specific network types
    • Easy installation – no need to switch off the electrical network when integrating
    • Data recording – logged readings are stored on an included SD card and can be downloaded to PC for remote viewing of measurements
    • Magnetised design – allows the logger to be used in closed cabinet installations
    • Connectivity – the PEL103’s information can be downloaded to PC via Bluetooth, Ethernet or USB
    • IP54 rated – the logger is protected against the effects of dust and water damage
    • Wide range of measurements – voltage, current, voltage ratio/current ratio, power, energy, phase, harmonics, phase order and can also calculate MIN/MAX measurements
    • Triple digital display – real-time updating of up to three values simultaneously

    Full List of Products Included

    • Chauvin Arnoux PEL103 Power & Energy Logger
    • 3 x MA194 Flexible Mini Clamps
    • 4 x Measurement Leads
    • 4 x  Black Crocodile Clips
    • 1 x SD Card (2GB)
    • 1 x Set of Rings and Inserts
    • 1 x Mains Cable
    • 1 x USB Cable (Type A/Type B)
    • 1 x Multifix Mounting System
    • 1 x Operating Manual on CD
    • 1 x Carrying Bag
    • 1 x Safety Datasheet
    • PEL Transfer PC Software
    • 1 x Quick Start-Up Guide
    • 1 x SD MN Adapter
    • 1 x FREE Dataview Software
    • Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
    • Voltage up to 1000V, Current up to 10,000A
    • BlueTooth, Ethernet and USB communication
    • Chauvin Arnoux PEL103 Technical Specifications

      Installation TypesSingle Phase, Split Phase, Three Phase with or without neutral
      and many other specific configurations
      Number of Channels3 voltage inputs/ 3 current inputs
      calculation of neutral current
      Network FrequencyDC, 50Hz, 60Hz and 400Hz
      Voltage Range10 to 1000V AC/DC/  ±0.2% + 0.5V
      Current Sensors Supported
      MN932 to 240A AC / ±1.2& + 1A
      MN93A0.005A AC to 5A AC / ±1.2% + 2mA
      0.1A AC to 120A AC / ±1.2% + 2mA
      C1933A to 1200A AC / ±0.5%
      A193 & MA193200mA to 10kA AC / ±1.2% + 70mA
      PAC9310A to 1000A AC / ±1.7% + 1A
      10A to 1400A AC / ±1.7% + 1A
      E3N50mA to 10A AC/DC / ±3.2% + 70mA
      100mA to 100A AC/DC / ±3.2% + 70mA
      Calculated Measurements
      Voltage Ratio / Current RatioUp to 650000V / up to 25000A
      Powerfrom 10W to 10GW / from 10 var to 10Gvar / from 10VA to 10GVA
      EnergyUp to 4EWh / 4 Evarh / 4EVAh (e + 1018)
      PhaseCos, tan, pf
      HarmonicsUp to the 50th order
      Complementary Functions
      Phase Order
      MountingMagnet, Hook
      Sampling / Acquisition Rate / Aggregation128S/period – 1 measurement per second – from 1 min to 60 min
      MemorySD card (SD-HC up to 32GB)
      CommunicationBluetooth (Class 2), Ethernet, USB
      Power Supply110V to 250V (+10% – 15%) @ 50-60Hz and 400Hz
      SafetyIEC 61010 600V CAT IV – 1000V CAT III
      Mechanical Specifications
      Dimensions256 x 125 x 37mm without sensor
      CasingIP54, UL (pending)

    Dataview Software Information Sheet

    Dataview Software Information Sheet

    PEL 103 104 Data Sheet