Showing 1–12 of 16 results
-
Save
25%
On RRP
Chauvin Arnoux PEL103 Power & Energy Logger
- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Voltage up to 1000V, Current up to 10,000A
- BlueTooth, Ethernet and USB communication
£1,890.00 £1,417.50 Inc VAT: £1,701.00 Add to basket -
Fluke 3140R Clip On Current Transformer
- CT Type – Clamp On
- Current Range – 2 to 400Amps
- Accuracy – 2 percent RDG +/- 0.04 Amps
- Frequency Response – 20 KiloHertz
- Jaw Opening – 3.2 centimeters (1.25 inches)
-
Save
14%
On RRP
Fluke 345 Power Quality Clamp Meter
- Measurements of AC current up to 1400A
- Measures DC current up to 2000A
- 600V CAT IV power analyser rating for use at service entrance
- Accuracy guaranteed - even in noisy environments with distorted waveforms, the Fluke 345 still delivers the accuracy you'll need
- Datalogging - ideal for testing over a prolonged period of time to spot intermittent faults. Log for over a month!
- Direct measurement of DC ripple (%) for battery and DC systems
- Analyse and log harmonics digitally and graphically
- Inrush current - capture and analyse nuisance tripping from 3 seconds to 300 seconds
- Easy to use - easily confirm power meter setup with large backlit colour display that shows waveforms and trends
- 3-phase power - built-in capability for balanced loads
- Included PowerLog software allows graphs and reports to be created
£1,517.00 £1,304.62 Inc VAT: £1,565.54 Add to basket -
Fluke BP1730 Li-Ion Battery Pack 3.7V
- Li Ion Battery Pack for the Fluke 1730
- Voltage: 3.7V
- Milliamps-per-hour: 2500mAh
-
Fluke MP1 Magnet Probes
- Magnetic Probes Tips
- Set of 4
- For 4MM Banana
- Very useful for control system monitoring
- No need to disconnect wiring or use cumbersome clip leads
-
Save
14%
On RRP
Fluke VR1710 Single-Phase Voltage Quality Recorder
- Plugs directly into a mains socket and monitors voltage quality
- Monitor trends, dropouts and power quality
- Easy to use
- Continuous recording
- Graphical summary of data and quick overview of problems
- Records for up to 339 days
- MIN/MAX/AVG value calculation
- Actual transient display
- Flicker recording
- Individual harmonics and THD value recording
- Statistical analysis of single phase voltage events
- Compatible with PowerLog software (included)
£768.00 £660.48 Inc VAT: £792.58 Add to basket -
Save
40%
On RRP
Kewtech 6315 Power Quality Analyser
- Simultaneous power and power quality measurements - calculate power, harmonics, waveform and power quality simultaneously
- 3 voltage channels and 4 current channels
- Helpful support functions - quick start guide, wiring check and sensor detection
- Guaranteed high accuracy measurements in compliance with IEC 61000-4-30 Class S and EN50160
- Remote monitoring on PC and Android devices - remote checking via Bluetooth communication and store data on the included SD card
- Compatible with various clamp sensors with range from 1000mA up to 3000A (plus earth leakage)
- Energy consumption check on site with trend and demand graphs
- High quality full colour TFT display with high resolution
- IEC 61010-1 compliant
- CAT IV 300, CAT III 600V and CAT II 1000V rated
£4,300.00 £2,580.00 Inc VAT: £3,096.00 Add to basket -
Save
40%
On RRP
Kewtech 8126 Load Current Clamp Adaptor
- 40mm jaw opening
- Works with several Kewtech products
- Measure current to 200A AC
£250.00 £150.00 Inc VAT: £180.00 Add to basket -
Save
40%
On RRP
Kewtech KEW8124 Clamp Sensor for KEW6310/ 6315 AC 1000A
- 68mm jaws
- Works with Kewtech products
- Test current to 1000A
£400.00 £240.00 Inc VAT: £288.00 Add to basket -
Save
40%
On RRP
Kewtech KEW8127 Clamp Sensor for KEW6310/6315 AC100A
- Measure AC current to 100A
- Works with KEW6310 power analyser
- For conductors up to 24mm in diameter
£245.00 £147.00 Inc VAT: £176.40 Add to basket -
Save
40%
On RRP
Kewtech KEW8130 Flexible Clamp Sensor
- Flexible design bends around conductors
- Measure AC current to 3000A
- Works with several Kewtech products
£450.00 £270.00 Inc VAT: £324.00 Add to basket -
Save
30%
On RRP
Metrel MI2883-EU Energy Master Power Quality Analyser
- 3 voltage channels with measurement range from 0 to 1000V RMS (CAT III 1000V)
- 4 current channels with support for automatic clamp recognition and on instrument range selection
- Compliance with power quality standard IEC 61000-4-30 Class S
- Complete power quality analysis according to EN 50160 including signalling and interharmonics
- Supports microSD memory cards (up to 32GB, 8GB included as standard)
- Colour-coded input terminals and terminal labels
- Intuitive main menu and large icons
- Power PC SW PowerView3 software to download, view and analyse your recorded data
£2,467.85 £1,727.50 Inc VAT: £2,073.00 Add to basket
