Showing 673–684 of 745 results
-
Save
27%
On RRP
Metrel MI2885-EU Master Q4 Power Quality Analyser
- 4 voltage channels with wide measurements range from 0 to 1000V rms (CAT III 1000V)
- 4 current channels with support for automatic clamp recognition and on instrument range selection
- Automatically determines connected clamp and clamp range selection
- Compliance with power quality standard IEC 61000-4-30 Class S
- EN 50160 compliance
- Supplied with 8GB internal SD card which can be expanded up to 32GB (sold separately)
- Colour-coded input terminals and terminal labels
- Easy to use interface with large icons
- Use Metrel's PC SW PowerView 3 software to view results, view data, analyse recorded data and create professional reports
- Flexible clamps (included in Euro advanced set) can be bent easily around difficult conductors
- Remote communication via Ethernet (with optional clock synchronisation)
- Rechargeable batteries
£3,899.88 Original price was: £3,899.88.£2,839.00Current price is: £2,839.00. Inc VAT: £3,406.80
Add to basket -
Save
33%
On RRP
Metrel MI2885-ST Master Q4 Power Quality Analyser
- 4 voltage channels with wide measurements range from 0 to 1000V rms (CAT III 1000V)
- 4 current channels with support for automatic clamp recognition and on instrument range selection
- Automatically determines connected clamp and clamp range selection
- Compliance with power quality standard IEC 61000-4-30 Class S
- EN 50160 compliance
- Supplied with 8GB internal SD card which can be expanded up to 32GB (sold separately)
- Colour-coded input terminals and terminal labels
- Easy to use interface with large icons
- Use Metrel's PC SW PowerView 3 software to view results, view data, analyse recorded data and create professional reports
- Flexible clamps (included in Euro advanced set) can be bent easily around difficult conductors
- Remote communication via Ethernet (with optional clock synchronisation)
- Rechargeable batteries
£2,953.86 Original price was: £2,953.86.£1,968.00Current price is: £1,968.00. Inc VAT: £2,361.60
Add to basket -
Save
27%
On RRP
Metrel MI2892 PowerMaster Power Quality Analyser
- Ideal for power quality assessment and troubleshooting in low and middle voltage electrical systems
- Suitable for long term analysis
- Voltage measurements with true RMS, peak and crest factor (4 channel)
- Current measurements with true RMS, peak and crest factor (4 channel)
- Measure active, reactive and apparent power
- Power measurements in compliance with IEEE 1459
- Measure unbalance and flicker
- Harmonic and interharmonic analysis up to the 50th (plus total harmonic distortion measurements)
- Measure active, reactive, generated and consumed energy
- Capture and record power supply events such as shutdown, interruptions, swells and dips
- Inrush currents monitoring and recording
- Waveform/inrush display with snapshot and recording
- Transient recording
- Power quality analysis according to 50160
- Record up to 7 user-configurable alarms
- Temperature measurements
- Calculate power factor (cos)
- Automatic Smart Clamp detection and Smart Clamp range selection
- Supplied with 8GB SD card but can accept SD cards of up to 32GB
- Colour-coded input terminals and terminal labels
- Full colour graphical screen
£4,865.19 Original price was: £4,865.19.£3,541.00Current price is: £3,541.00. Inc VAT: £4,249.20
Add to basket -
Save
35%
On RRP
Metrel MI3100S Eurotest Easi Multifunction Tester
- Built-in help screens for referencing on site.
- Built-in fuse tables for automatic evaluation of the line / loop impedance result.
- Monitoring of all 3 voltages in real-time.
- Automatic polarity reversal on continuity test.
- Loop impedance test without tripping the RCD.
- Built-in charger and rechargeable batteries as standard accessory.
- Automated RCD testing procedure.
£902.21 Original price was: £902.21.£590.10Current price is: £590.10. Inc VAT: £708.12
Add to basket -
Save
35%
On RRP
Metrel MI3100SE Eurotest Easi Multifunction Tester
- Predefined mini AUTOSEQUENCEs:
- Auto TT (U, Zln, Zs, Uc);
- Auto TN/RCD (U, Zln, Zs, Rpe);
- Auto TN (U, Zln, Zlpe, Rpe).
- Built-in help screens for referencing on site.
- Built-in fuse tables for automatic evaluation of the line / loop impedance result.
- Monitoring of all 3 voltages in real-time.
- Automatic polarity reversal on continuity test.
- Loop impedance test without tripping the RCD.
- Built-in charger and rechargeable batteries as standard accessory.
- Automated RCD testing procedure.
- BT communication with PC, Android tablets and smart phones via BT dongle.
- PC SW EuroLink PRO for downloading of test results and report creation.
- EuroLink Android APP, data management tool (option).
£959.82 Original price was: £959.82.£628.00Current price is: £628.00. Inc VAT: £753.60
Add to basket -
Save
34%
On RRP
Metrel MI3102BT EurotestXE Multifunction Tester
- Ideal for compliance with 17th Edition regulations, BS7671 and BS EN61557
- Insulation Test: Offering 50V, 100V, 250V, 500V and 1000V DC
- Continuity Test: 200mA DC test current with polarity change and 7mA test current without RCD tripping
- Line/Loop Impedance, with built-in fuse tables for automatic evaluation of the result
- Loop Impedance with Trip Lock RCD function
- TRMS voltage and frequency
- Phase sequence with voltage monitor between phases.
- Automated RCD Testing, including Ramp Test
- Power measurements and harmonics analysis
- Earth Resistance Test (3-wire and 2-clamps method)
- First fault leakage current (ISFL)
- Testing of Insulation Monitoring Devices (IMDs)
- Leakage True RMS - (optional Clamp required - part no. A1018 / A1019)
- Light/Lux Measurements (optional Lux Probe required - part no. A1172 / A 1173)
- Rechargeable batteries and in-built charger as standard
- Includes Eurolink PRO Software for downloading test data and report creation
- Built-in help screens for referencing on the job
- Lightweight and compact for your convenience
£1,423.72 Original price was: £1,423.72.£938.55Current price is: £938.55. Inc VAT: £1,126.26
Add to basket -
Save
36%
On RRP
Metrel MI3108PRO Eurotest PV Tester
- Combined photovoltaic and electrical installation measurement device
- Portable and lightweight
- Massive amount of measurement functions
- Calculation of STC values
- Efficiency calculations
- Graphical representation of module I-U curves
- 2 voltage and 2 current channels for simultaneous measurements
- Works with PV remote unit for simultaneous measurements of solar irradiation and temperature of PV modules
- Automated RCD testing
- Support for B type RCDs
- Earth resistance measurements
- Built-in fuse tables for automatic evaluation of line/loop impedance results
- Online monitoring of 3 voltages
- Scope function
- Loop impedance test with no RCD trippping
- 1 phase power and energy measurements
- Rechargeable batteries
- 1800 record memory storage
- Help screens
- Compatible with software package
£4,159.84 Original price was: £4,159.84.£2,678.00Current price is: £2,678.00. Inc VAT: £3,213.60
Add to basket -
Save
36%
On RRP
Metrel MI3108ST Eurotest PV Tester
- Voltage, current, power and energy
- UOC (open circuit voltage)
- ISC (short circuit current)
- I-U curve of PV modules and strings
- Irradiance
- Module temperature
- AC side measurements:
- Voltage, current, frequency, power, PF, energy, harmonics
- Efficiency of PV module, inverter and PV system calculation
- Electrical installation measurements:
- Insulation resistance
- Continuity of PE conductors
- Line impedance
- Loop impedance
- RCD testing
- Earth resistance
- AC current
- TRMS voltage
- Frequency
- Phase sequence
- Power, energy and harmonics
- General
- Calculation of STC values
- Efficiency calculations
- Graphic representation of curve
- Bult in memory
- Automated RCD testing
- Rechargeable batteries
£3,216.18 Original price was: £3,216.18.£2,070.00Current price is: £2,070.00. Inc VAT: £2,484.00
Add to basket -
Save
33%
On RRP
Metrel MI3121 Smartec Insulation And Continuity Tester
- Very large LCD display with bargraph and backlight
- High measuring range of up to 30 GΩ with test voltage from 50 V to 1000 V
- Fast and reliable continuity tests with automatic polarity reversal
- Voltage and frequency measurements
- Preprogrammed limits
- PASS/FAIL evaluation of measurement result
- Bright GREEN/RED indicators provides visual evaluation of results
- Suited for testing on CAT IV installations
- Magnetic holder allows hands-free operation
- Built-in battery charger
- Two level memory structure for saving of test results and parameters
- Basic downloading with EuroLink PRO PC SW package
- Compatible with EuroLink PRO Plus PC SW package
- USB and RS232 ports
- Robust and ergonomic design
£534.60 Original price was: £534.60.£360.00Current price is: £360.00. Inc VAT: £432.00
Add to basket -
Save
33%
On RRP
Metrel MI3125-L Eurotest Combo Lite Multifunction Installation Tester
- Perform a variety of electrical and installation safety tests
- Suitable for testing domestic and industrial installations
- Ideal for checking single and multiphase TT and TN systems
- Includes tests required by the EN 61557 standard
- TRMS voltage
- TRMS frequency
- Phase sequence
- Line impedance
- Loop impedance
- Loop impedance with Trip Lock RCD function (does not trip RCDs whilst testing)
- RCD testing (general and selective, type AC and A) with an automated testing procedure
- Continuity of PE conductors with a 200mA test current and an automatic polarity change
- Insulation resistance (measure up to 1000MΩ) with a DC test voltage (50-1000V)
- Dedicated help screens for each test
- Includes integrated fuse and RCD characteristics for the automatic evaluation of test results
- Includes loop impedance tables for evaluating loop and line impedance results in comparison to regulations
- Green LED light indicates that a result has passed
- Red LED light indicates that a result has failed
- LED lights are located in either side of the LCD display
- Large, graphic, easy-to-read display with backlight
- View measurement, measurement parameters and any messages via the display
- Monitor up to three voltages in real-time with the online voltage monitoring feature
- Optimised for longevity
- Built-in charger
- Supplied with a set of rechargeable NiMH batteries
- Upgradable technology allows the tester’s firmware to be updated in accordance with any changes in regulations
- Ideal for performing an eclectic variety of electrical and safety tests on single and multiphase TT and TN system
£789.48 Original price was: £789.48.£531.36Current price is: £531.36. Inc VAT: £637.63
Add to basket -
Save
33%
On RRP
Metrel MI3125BT Eurotest Combo Bluetooth Multifunction Tester
- Bluetooth connectivity - wirelessly connect your smartphone to your multifunction tester (requires optional license - sold separately)
- Automatic loop evaluation function with built in loop impedance tables
- B-type RCD testing: suitable for testing AC and DC sensitive RCD’s, including Type EV RCD and RCM for EVSE installations
- Fully downloadable with built-in memory: interfaces directly with a PC via RS232 or USB cable (PC software included)
- Integrated help screens give advice when working on site
- Upgradeable unit: the MI3125BT can be upgraded to stay in line with the latest regulations
- Performs both 2-wire and 3-wire earth spike testing
- Monitors all three voltages in real time with online voltage monitoring
- Automatic polarity reversal when carrying out continuity testing
- Selectable insulation test voltages from 50V to 1000V
- TripLock function: Zs (RCD) function performs a loop test without tripping RCDs
- Fully rechargeable
- Automated RCD testing
- Phase sequence testing
£918.00 Original price was: £918.00.£617.00Current price is: £617.00. Inc VAT: £740.40
Add to basket -
Save
36%
On RRP
Metrel MI3152-ES Entry Set Eurotest XC Multifunctional Electrical Tester
- Insulation resistance with DC voltage from 50 V to 1000 V;
- Continuity of PE conductors with 200 mA DC test current with polarity change;
- Continuity of PE conductors with 7 mA test current without RCD tripping;
- Line/Loop impedance;
- Loop impedance with Trip Lock RCD function;
- TRMS voltage and frequency;
- Phase sequence;
- Power and harmonics;
- RCD testing (general and selective, type AC, A, F, B, B );
- Earth resistance (3-wire and 2-clamps method);
- Specific earth resistance with Ro-adapter (option);
- TRMS leakage and load currents (option);
- First fault leakage current (ISFL);
- Testing of Insulation Monitoring Devices (IMDs);
- Illumination (option);
- High resolution Loop impendance (mΩ) (option).
£1,867.36 Original price was: £1,867.36.£1,189.00Current price is: £1,189.00. Inc VAT: £1,426.80
Add to basket