Save

33%

On RRP

Megger RCDT320 RCD Tester

£405.35 Inc VAT: £486.42

    Calibration Certificate

    Add a 12 month Calibration Certificate

    SKU RCDT320 Categories , Brand:

    Description

    Megger RCDT320 RCD Tester

    Megger’s mid-range RCD tester (part of the RCDT300 series), the Megger RCDT320 RCD Tester improves upon the basic functionality of the RCDT310 and has several advanced features not available on the previous model.

    This residual current device (RCD) tester is suitable for use on a wide variety of RCD types, including selective breakers, DC breakers (1/2 I, I, I and 5I), 30/100/300/500mA and 10mA / 1A RCDs and is used to evaluate that they are correctly implemented into electrical systems and trip out at the appropriate level.

    One of the main differences between this tester and the RCDT310 is the inclusion of ramp and auto sequence testing procedures. The ramp function automatically gradually increases the current level applied during the tester while the auto sequence testing automatically cycles through the necessary testing procedures to get quick, accurate and comprehensive results with minimal input from the user.

    You can view the exact difference between each model in Megger’s RCDT300 series by taking a look at the table in the tech specs section further below.

    • Performs 1/2 I, 1 x I and 5 x I tests on RCDs rated at 30mA, 100mA, 300mA and 500mA
    • Suitable for use with both general and selective (time-delayed) RCD types
    • Also suitable for testing RCDs rated at 10mA and 1000mA
    • DC RCD testing
    • Selectable polarity – test at 0 or 180°
    • Measurements of touch voltage at the start of the test (with selectable voltage inhibit of 25V or 50V)
    • Rubber-armoured casing – protects the tester from harm at all times in even the most arduous industrial environments
    • Rigid display cover – folds down and protects the screen and tester functions when not in use
    • Colour-coded ranges – easily choose what you need (user guide also included in tester lid)
    • Ramp testing – current level is slowly increased until the RCD trips
    • Automatic testing – all this mode requires is you to reset the RCD each time the test completes. All results are stored on the meter for reference
    • Megger RCDT320 RCD Tester
    • Mains Plug Test Lead (BS1363)
    • 2-Wire Test Lead With Prods and Clips