Showing 1–12 of 64 results
-
Save
27%
On RRP

Megger 1001-991 MFT Replacement 3 Wire Test Lead Set
- These test leads are replacements for Megger's range of multifunction testers
- Colour - red, blue and green
- Compatible tips - 1000-562 GS38 probe tips
- Unfused
- Complete with Crocodile Clips
- Instrument end - 4 mm plugs
- Length - 1.2 m
- Test end - 4 mm safety probes and croc clips
- This set of Megger Test Leads are the standard lead set for the Megger MFT series of multifunction testers.
£74.00 £54.00 Inc VAT: £64.80
Add to basket -
Save
30%
On RRP

Megger 1007-157 SP5 Remote Switch Probe
- CAT IV 600V safety rating
- 3-pin plug
- 1.5m red silicone lead
£120.00 £84.00 Inc VAT: £100.80
Add to basket -
Save
20%
On RRP

Megger 1014-291 MFT Replacement 3 Wire Standard Test Lead Set
- 10 Piece Standard Kit
- Colour - red, blue and green
- Includes Leads, Crocs & probes
- Unfused
- Instrument end - 4 mm plugs
- Length - 1.4 m
- Test end - 4 mm safety probes and croc clips
- This set of Megger Test Leads are the standard lead set for the Megger MFT series of multifunction testers.
£60.00 £48.00 Inc VAT: £57.60
Add to basket -
Save
20%
On RRP

Megger 1014-292 MFT Replacement 3 Wire Pro-Kit Test Lead Set
- 13 Piece Pro-Kit
- Colour - red, blue and green
- Includes Leads, Crocs, probes & Grabbers
- Unfused
- Instrument end - 4 mm plugs
- Length - 1.4 m
- Test end - 4 mm safety probes and croc clips
- This set of Megger Test Leads are the standard lead set for the Megger MFT series of multifunction testers.
£90.00 £72.00 Inc VAT: £86.40
Add to basket -
Save
20%
On RRP

Megger 1014-299 MFT Replacement Grabber Set
- 3 Piece Grabber Kit
- Colour - red, blue and green
- Ideal for MFT/LTW/RCDT & LRCD Series
£35.00 £28.00 Inc VAT: £33.60
Add to basket -
Save
20%
On RRP

Megger 1014-301 MFT Replacement Prod & Clip Accessory Set
- 7 Piece Kit
- Colour - red, blue and green
- Includes Crocs & probes
- Unfused
£36.00 £28.80 Inc VAT: £34.56
Add to basket -
Save
29%
On RRP

Megger AVO210 Digital Multimeter
- 2000 count digital display
- AC/DC voltage measurements up to 750 (AC) and 1000V (DC)
- AC/DC current measurements up to 10A
- Contnuity and diode testing with integrated buzzer
- Voltsense - includes non-contact voltage detector
- Resistance measurements from 0 to 20MΩ
- Capacitance measurements from 0 to 2.000mF
- Frequency measurements from 0 to 20MHz
- Data hold function - freezes the current reading on the display
- Auto and manual ranging (selectable)
- MAX/MIN measurement mode displays the highest and lowest values taken over a period of time
- CAT III 600V safety rated
£104.00 £74.00 Inc VAT: £88.80
Add to basket -
Save
24%
On RRP

Megger AVO410 TRMS Digital Multimeter
- Professional digital multimeter highly recommended for use by electricians
- True RMS - ensures accuracy is maintained when testing on AC circuits
- Measure AC/DC voltage up to 1000V
- Measure AC/DC current up to 10A
- Resistance measurements up to 60MΩ
- Diode and continuity checks
- Measure frequency to 60.00MHz
- Measure capacitance to 6.00mF
- 6000 count backlit digital display
- Autoranging - automatically adjusts itself to the correct range (or you can manually select it yourself)
- MIN/MAX measurement mode calculates the maximum and minimum values calculated over a period of time
- Data hold function temporarily stores current value shown on the screen
- CAT IV 600V safety rated
£205.00 £155.00 Inc VAT: £186.00
Add to basket -
Save
20%
On RRP

Megger Blow Moulded Hard Carry Case – MFT1700 / MFT1800 series 1004-319
- Suitable for MFT1700 Series
- Fits your tester and accessories
- Approx Measurements: 37 x 34 x 11cm
£40.00 £32.00 Inc VAT: £38.40
Add to basket -
Save
32%
On RRP

Megger DCM1500 TRMS Clamp Multimeter
- Measure both AC/DC current to 1500A
- True RMS - ensures accuracy when testing on irregular waveforms
- Large jaws - 51mm opening for use with larger conductors
- Test AC voltage to 750V
- Test DC voltage to 1000V
- Resistance testing from 0 to 400Ω
- Frequency tests from 20 to 400Hz
- Continuity check with buzzer
- Automatically switches itself when left idle for 30 minutes
- Peak hold and MIN/MAX functions
- Data hold function
- Backlit LCD screen
- Average battery life of 100 hours
£355.00 £241.40 Inc VAT: £289.68
Add to basket -
Save
31%
On RRP

Megger DCM300E Earth Leakage Clamp Meter
- Has the capability to measure currents of up to 300 A ac and therefore usable in different situations and applications
- Has four ranges: 30 mA, 300 mA, 30 A and 300 A with a 0.01 mA resolution
- Enables the user to read measurements even in poorly lighted or confined places through its data hold feature.
- Facilitates accurate monitoring of changes though its analog-style bar graph that allows the operator to easily interpret rapidly changing bar graphs instead of the digital display
- Prolongs battery life since it automatically turns its power off if it is not used for 10 minutes.
- Has jaw opening capability of 40 mm
- Is very safe to use as its design even exceeds the safety standards of both IEC and EMC
- Further ensures safety through additional features like a tactile barrier and extra insulation around the jaw that decreases incidences of short circuits between live conductors and protects the operator against electric shock
- Is so far still the easiest and least complicated means of troubleshooting faults within a circuit since its clamp on design does not require the operator to disassemble wirings
- Is extremely handy with its pocket-size design of 64(W)x176(H)x23(D) mm and light weight of only 125 g
£465.00 £320.00 Inc VAT: £384.00
Add to basket -
Save
39%
On RRP
Megger DCM305E TRMS Earth Leakage Clamp Meter
- Six ranges: 6 mA, 60 mA, 600 mA, 6 A, 60 A, 100 A
- Minimum resolution of 0.001 mA on the 6 mA range
- Manual or Auto ranging
- Pre-set leakage limits (0.25, 0.50, 3.5mA) visual and audible indication if limit is exceeded
- 40mm jaw for both insulated and non-insulated conductors
- TRMS readings
- Low pass filter (50/60 Hz) – aids stability of readings
- Auto-backlight, 6000 count display
- Auto, data and peak hold for hard to read measurements
- Analogue bar graph display for trending
£325.00 £199.00 Inc VAT: £238.80
Add to basket