01785 600 691 • enquiries@thecalcentre.co.uk

REQUEST A QUOTE TODAY

Save

20%

On RRP

Megger EVX100 Electric Vehicle Charge-Point Adapter
IN STOCK
Megger EVX100 Electric Vehicle Charge-Point Adapter - Image 2
Megger EVX100 Electric Vehicle Charge-Point Adapter - Image 3

Megger EVX100 Electric Vehicle Charge-Point Adapter

Original price was: £570.00.Current price is: £456.00. Inc VAT: £547.20

    SKU EVX100 Categories , , Brand:

    Description

    Megger EVX100 Electric Vehicle Charge-Point Adapter

    Used with Megger MFT-X1 multifunction installation testers, the EVX100 adaptor provides all the functions needed for automated and manual testing of single- and three-phase Mode 3 electric vehicle charge points rated at up to 22 kW. Unlike other adaptors, the EVX100 mounts directly onto the MFT, which means it provides a fully integrated solution that doesn’t need inconvenient interconnecting cables.

    Another unique benefit is that the EVX100 is directly controlled by the MFT-X1, which makes it easier and faster to use. In addition, direct control reduces the possibility of making incorrect test selections. The EVX100 also confirms that the mode set on the charger is correct for the test being performed.

    To make testing even more convenient, the EVX100 offers automated testing, which means that you will no longer have to manually cycle the charge point through numerous CP states every time a test trips a protective device such as an RCD or RDC. As protective devices are often fitted in locations at a considerable distance from the charge point, this feature can potentially save a lot of walking and valuable time.

    The EVX100 is powered by a high capacity internal battery, which can be recharged quickly via a standard USB-C charging port. This means you won’t need mains cables with various types of plugs. Just two charger connectors – Type 1 and Type 2 – will almost certainly cover all of your testing requirements, with type 2 supplied as standard. And, if you’re a user of CertSuite Installation software, you can produce customised test certificates in real-time with just a couple of clicks.

    Key Features

    • Integrated accessory for MFT-X1
    • Automated testing for single and three-phase Mode 3 AC EVSE
    • No need for a manual adaptor or control box
    • Automatic PP and CP state control
    • Identifies all four operational CP states (A, B, C, D) and intermediate states (A1, A2, B1, B2, etc.)
    • PE issue detection via MFT-X1 test buttons
    • Type 2 charging plug included
    • Automated testing for IEC61851 and IEC62955 protective devices
    • RCD auto-reset during trips
    • Compatible with all MFT-X1 instruments (requires firmware update)
    • Powered by a lithium-ion battery with a USB Type-C charging port
    • IP54 rating for outdoor use

    What’s Included?

    • EVX100 adaptor
    • Carry case
    • User manual
    • Integrated accessory for MFT-X1
    • Automated testing for single and three-phase Mode 3 AC EVSE
    • No need for a manual adaptor or control box
    • Automatic PP and CP state control
    • Identifies all four operational CP states (A, B, C, D) and intermediate states (A1, A2, B1, B2, etc.)
    • PE issue detection via MFT-X1 test buttons
    • Type 2 charging plug included
    • Automated testing for IEC61851 and IEC62955 protective devices
    • RCD auto-reset during trips
    • Compatible with all MFT-X1 instruments (requires firmware update)
    • Powered by a lithium-ion battery with a USB Type-C charging port
    • IP54 rating for outdoor use

    Power Supply

    • Internal battery: Li-ion 3180 mAh
    • Recharging Type: C USB (required supply is 5 V, 1 A maximum)
    • Charging Status: LED
    • Input Voltage:
    • 230 V AC nominal max 253 V AC
    • 400 V AC nominal max 440 V AC
    • Input Frequency: 50/60 Hz
    • CP State Verification: A1, A2, B1, B2, C1, C2, E, F
    • Connection Options: Fixed Type 2: IEC 62196-1
    • Safety: IEC61010-1:2010 61010-031:2015, CAT II 250 V
    • Temperature Range:
    • Working: -10 °C to +55 °C
    • Storage: -25 °C to +70 °C
    • Humidity Range: 90% R.H at +40 °C max
    • Ingress Protection: IEC 660529: IP 54 – protected against dust and water splashes; suitable for indoor and outdoor use
    • Vibration: MIL-PRF-28800F: Class 2
    • Maximum Operating Altitude: 2000 m
    • Pollution Degree2
    • Mechanical: EVX Case
    • Dimensions: 133.5 x 115 x 56 mm (5.2 x 4.5 x 2.2 inches) excl. cable
    • Unpackaged Weight: 976 g
    • Packaged Dimensions: 350 x 280 x 75 mm (13.8 x 11.02 x 2.96 inches)
    • Packaged Weight: 1580 g
    • Cable Length: 2 m

    EVX100 Datasheet

    DOWNLOAD

    Sign Up for Emails

    Latest news on sales and products!

    The Calibration Centre Ltd, Unit 1 Antom Court, Tollgate Drive, Tollgate Industrial Estate, Stafford, ST16 3AF

    Telephone: 01785 600691

    Company Registration No: 04489557

    VAT No: 758241516

    Facebook-f Twitter Instagram

    Designed by Choose Purple

    Home

    Categories

    Information

    Designed by Choose Purple