Showing 13–24 of 66 results
-
Save
25%
On RRP
Megger DCM310 Digital Clamp Meter
- Current measuring device
- Measures up to 400A
- Low current ranges for improved resolution
- MAX hold mode
- Data hold function
- Small design for inserting into difficult applications
- 27mm jaws
- CAT III 600V safety rated
£116.00 £87.00 Inc VAT: £104.40
Add to basket -
Save
31%
On RRP
Megger DCM320 Clamp Meter
- 600 V AC/DC measurement range
- Resistance up to 20 MΩ
- Robust, compact and lightweight
- Extensive battery life
- Auto power off functionality
- Freeze frame data hold functionality
- Max hold store and display
- 2000 digit large scale readout
- Compact clamp jaw measures up to 27mm diameter cables
- 12 month warranty
£137.00 £94.00 Inc VAT: £112.80
Add to basket -
Save
31%
On RRP
Megger DCM330 Fork Clamp Multimeter
- Open-style jaws - doesn't require clamping around the conductor
- Suitable for use with conductors up to 16mm in diameter
- Compact, pocket-sized design
- Measures AC current up to 200A
- 0.1 to 1000V autoranging AC/DC voltage measurements
- Measure resistance from 0.1Ω to 20MΩ
- Continuity buzzer and diode checks
- Non-contact AC voltage detector
- CAT III 1000V and CAT IV 600V compliance
- Auto power off when left idle
£153.00 £105.00 Inc VAT: £126.00
Add to basket -
Save
32%
On RRP
Megger DCM340 Digital Clamp Meter
- Measurements of AC and DC current to 600A
- Measurements of AC/DC voltage to 600V
- Test resistance to 400Ω
- Continuity testing
- Frequency testing
- 35mm jaws
- Digital bargraph
- Peak hold
- MAX/MIN mode
- Data hold function
£195.00 £132.00 Inc VAT: £158.40
Add to basket -
Save
34%
On RRP
Megger EVCA210-UK Electric Vehicle Charge-Point Adapter
- Use with a single or multifunction tester to verify the functionality and safety of EV charge points
- Suitable for checking single- and three-phase EV charge points
- Maintain compliance with IEC/ EN 61851-1 and IEC/ HD 60364-7-722
- Mains socket
- 4mm connection points: L1, L2, L3, N and PE
- CP signal terminals for connecting an oscilloscope to measure CP signals
- Fully test Mode 3 AC electric vehicle charge points
- Compliant with UK, European and other international wiring regulations
- Compliant with the Low Voltage Directive LVD 2014/35
- Type 2 connector for testing charging points with panel-mounted sockets or a fixed cable with a vehicle connector
- Type 1 connector for checking charging points with a fixed type 1 cable connector, such as those found on a Mitsubishi PHEV
- Simulates the connection of an EV to the charging point
- PP charging state simulation
- CP charging state simulation
- Rotary switch
- Push-button for CP Error “E” simulation
- Push-button for PE Error (Earth Fault) simulation
- Push-button for PE Pre-Test
- IP54
- CAT II 300V
- Ergonomic and easy-to-use adapter specifically designed for testing the safety and effectiveness of EV charging points
£550.00 £365.00 Inc VAT: £438.00
Add to basket -
Save
10%
On RRP
Megger EVCC300-UK Electric Vehicle Charge-Point Checker
- Checks mode 2 and single phase mode 3 (level 1 and two phase level 2) chargers
- Checks chargers with SAE J1772 Type 1 and Type 2 connectors
- Performs four EV charger safety checks
- Performs four EV charger operation checks
- Checks to see if nuisance tripping or RCD/GFCI is likely to occur
- Reads control pilot state response from EV Charger to IEC61852
£675.00 £607.50 Inc VAT: £729.00
Add to basket -
Save
35%
On RRP
Megger LRCD210 RCD Tester
- Non-tripping Loop test. RCDs rated 30 mA or greater are not tripped by the loop test, even electronic RCDs
- 3 wire low current non-tripping loop test provides measurements from 0.01 ohms to 2 kohms
- Auto-ranging tests.
- Non-trip loop tester
- RCD testing from 10 mA to 1000 mA
- Extremely easy and safe to use
- Built-in protective front cover
- Tough Rubber armoured case
- Weatherproof
- PFC calculation and display from the loop test measurement
- Supply voltage display on connection to circuit
- Supply frequency measurement
£865.00 £562.00 Inc VAT: £674.40
Add to basket -
Save
35%
On RRP
Megger LRCD220 RCD Tester
- Non trip loop testing
- PFC and single phase function
- High current loop testing
- 3 phase safe
- Built-in voltmeter
- 1.2 x I, 1 x I test and 5 x I testing
- Auto RCD testing
- Touch/contact voltage display
- 10, 30, 100, 300, 500mA ranges
- 1000mA range
- Compatible with AC, AC selective, DC and DC selective RCDs
- Selectable phase
- Ramp test
- Frequency testing function
- Phase rotation calculations
- Backlight
- IP54
£1,015.00 £659.00 Inc VAT: £790.80
Add to basket -
Save
34%
On RRP
Megger LT300 Earth Loop Tester
- High current loop testing instrument
- Portable design made for use out in the field
- Heavy duty armoured casing with protective cover
- Suitable for both single and 3 phase testing
- 16Hz to 400Hz operation
- CAT IV 300V rated
- Two loop impedance ranges of 20Ω and 200Ω
- Protected against accidental phase-to-phase connections
£575.00 £380.00
Select options -
Save
35%
On RRP
Megger LTW315 Earth Loop Tester
- 2-wire loop testing procedures on phase to earth and phase to neutral
- Guaranteed to not trip out RCDs thanks to non-trip loop testing
- Noise detection filters out electrical noise that can create erratic readings
- Resolution down to 0.01Ω
- Portable lightweight instrument with tough carrying case encasing the tester
- AUTO start function starts testing as soon as the leads are connected
- PFC display up to 20kA
£660.00 £429.00 Inc VAT: £514.80
Add to basket -
Save
35%
On RRP
Megger LTW325 Earth Loop Tester
- 2-wire non trip loop testing
- 2 wire fast testing (high current)
- Suitable for use on 110V to 280V applications
- Also suitable for use on 50V to 440V applications
- Phase to phase testing
- 20 KA PFC range
- 0.01Ω resolution
- Automatic noise detection and correction
- Auto loop test initiation
- Voltage and frequency measurements
- Max Zs display
- R1 R2 display
£720.00 £468.00 Inc VAT: £561.60
Add to basket -
Save
35%
On RRP
Megger LTW335 Downloadable Earth Loop Tester
- 2 wire, non-tripping loop testing
- 50V to 440V operation
- Phase to phase testing
- 20-40 KA PFC range
- 0.01 ohm resolution
- Auto noise detection
- Auto start loop test
- Voltage and frequency measurement
- Backlit display
- Fold-away front cover
- IP54 weatherproof casing
- Accepts rechargeable batteries
- Store test results
- Download test results
- Test lead set with crocs
- Mains socket lead test
- IEC51010-1 300V CATIV safety rating
- EN61557
£760.00 £494.00 Inc VAT: £592.80
Add to basket