Showing 73–84 of 248 results
-
Save
27%
On RRP
Fluke 6500-2 PAT Tester Kit
- Dedicated key for each test for ‘one-touch’ testing
- Pre-set pass/fail levels to save time
- Large backlit display for easy reading
- Single mains socket for appliance connection
- Separate IEC socket for easy mains/extension lead testing
- Detachable test leads for quick field replacement
- Integral carrying handle
- USB port for data transfer
£2,376.00 Original price was: £2,376.00.£1,734.48Current price is: £1,734.48. Inc VAT: £2,081.38
Add to basket -
Save
15%
On RRP
Fluke 700M20TH Premium M20 Pressure Test Hose Kit
- Includes a pressure hose with a 5000psi rating and a premium M20 adapter
- Tools are not required to facilitate a connection between the M20 adapter and female M20 connections
- 1/8” NPT connection for permanently mounting the test hose to compatible calibrators and test pumps
- Compatible with Fluke 700G Precision Gauge Calibrators
£662.00 Original price was: £662.00.£562.70Current price is: £562.70. Inc VAT: £675.24
Add to basket -
Save
15%
On RRP
Fluke 700MTH Premium Metric Pressure Test Hose Kit
- Can be used with compatible pressure calibrators and test pumps to facilitate pressure measurements and/or calibrations
- 5000 psi rating
- Male 1/ 4” metric/ BSP connector
- Can be attached to 1/ 4” female metric/BSP connectors without the need for tools
- A practical tool, ideal for extending the capabilities of compatible pressure calibrators and test pumps
£672.00 Original price was: £672.00.£571.20Current price is: £571.20. Inc VAT: £685.44
Add to basket -
Save
15%
On RRP
Fluke 700TTH5K Premium Pressure Transmitter Test Hose Kit
- Optimised for use with selected Fluke calibrators and test pumps, such as the Fluke 700PTP-1 Pneumatic Test Pump
- Facilitates a connection between the test/ calibration instrument and the module-under-investigation
- This kit consists of a 5000psi rated test hose with a 1/8” NPT connection and 1/4” NPT male connectors
- 1/8” NPT connection allows the test hose to be permanently mounted to the test pump, tools are not needed to facilitate this connection
- 1/4" NPT connectors can be connected to transmitters without the need for tools
- Practical
- Easy-to-use
- Ideal for quickly and easily facilitating a connection between compatible Fluke test pumps or calibrators and instruments-under-investigation
£672.00 Original price was: £672.00.£571.20Current price is: £571.20. Inc VAT: £685.44
Add to basket -
Save
15%
On RRP
Fluke 705 Loop Calibrator
- Cost-effective, powerful loop calibrator
- mA sourcing, simulation and measurement
- Large-size display with simple pushbutton interface
- Simultaneous mA and % readout
- mA accuracy of 0.02%
- Push button 25% steps for fast, easy linearity checks
- Span check - ideal for fast confirmation of zero and span
- Choose between slow ramp, fast ramp and step for smooth outputs for valve slewing or functional loop testing
- Internal 24V loop supply - power and read a transmitter at the same time, with no need to use a separate digital multimeter
- 0-20mA or 4-20mA default startup modes
- 0-28V DC measurements for checking loop voltage
- Compact case with separate protective holster
- Includes 3 year warranty from Fluke
£947.00 Original price was: £947.00.£804.95Current price is: £804.95. Inc VAT: £965.94
Add to basket -
Save
15%
On RRP
Fluke 707 Loop Calibrator
- QuickClick system sppeds up use significantly
- mA sourcing, simulation and measurements
- 0.015% accuracy
- 0.001mA resolution
- Can simultaneously display mA and % of span display
- Selectable step and ramp outputs
- 24V loop supply with mA measure, including 250Ω HART resistor
- 0V DC to 28V DC measurements for loop voltage
- Removable battery door
- Compact case protective holder
- 3 year manufacturer's warranty
£1,111.00 Original price was: £1,111.00.£944.35Current price is: £944.35. Inc VAT: £1,133.22
Add to basket -
Save
15%
On RRP
Fluke 709 Precision HART Loop Calibrator
- High accuracy of 0.01% of reading
- Operates on 6 AAA batteries
- Small and rugged design
- Built in selectable 250Ω resistor for HART communication
- 24V DC loop power with mA meaure mode
- Resolution of 1μA on mA and 1mV on voltage ranges
- Simple two wire measurement method
- Variable step and ramp time in seconds
- Adjustable span selection
- Valve test
- Fast transfer of calibration data
- Data logging capabilities
- HART functions - read message, read tag, descriptor, cal data, read sensor PV info, read PV output info, read long tag, write PV ranges (upper and lower), enter/exit fixed current mode, set zero offset, trim DAC zero and trim DAC gain
£1,776.00 Original price was: £1,776.00.£1,509.60Current price is: £1,509.60. Inc VAT: £1,811.52
Add to basket -
Save
15%
On RRP
Fluke 709 Precision Loop Calibrator
- High accuracy loop calibration system
- Small and rugged design - portability and durability in one unit
- Simple-to-use user interface with rotary knob for ease of use
- Built in selectable 25Ω resistor for HART communication
- 24V DC loop power when using mA measure mode (-25% to 125%)
- Resolution of 1μA on mA ranges and 1mV on voltage ranges
- Simple two wire connection
- Auto shutdown when left idle
- Variable step and ramp time in seconds
- Adjustable span selection
- Valve test
£1,190.00 Original price was: £1,190.00.£1,011.50Current price is: £1,011.50. Inc VAT: £1,213.80
Add to basket -
Save
15%
On RRP
Fluke 712 RTD Temperature Calibrator
- Portable, lightweight and handheld calibrator for calibrating RTDs
- Measure temperature from RTD ouput
- Simulate RTD output
- Suitable for use with seven different RTD types - Pt200, Pt500, Pt1000, Ni 120, 385, 392 and JIS
- Measure additional RTDs using the resistance measurement functions
- Simulate additional RTDs using the resistance source function
- Switch between Celsius and Fahrenheit measurement modes
- Four shrouded banana jack ports
- Compatible with Rosemount pulsed RTD transmitters (pulses > 10ms)
- Holster with storage for test leads
£1,433.00 Original price was: £1,433.00.£1,218.05Current price is: £1,218.05. Inc VAT: £1,461.66
Add to basket -
Save
15%
On RRP
Fluke 714B Thermocouple Temperature Calibrator
- Measures and simulates 17 different thermocouple types - E, N, J, K, T, B, R, S, C, L, U, BP, XK, G, D, P and M
- Measure and source millivolts (mV)
- Measure 4 to 20mA signals while simultaneously sourcing a temperature signal
- Built-in hanging tool and kick stand
- Configurable 0 and 100% source settings for quick 25% linearity checks
- Linear ramp and 25% step auto ramp based on 0 and 100% settings
- Dual inputs
- Backlit LCD display
- Power down settings are remembers at power up for easy testing restarts
£1,433.00 Original price was: £1,433.00.£1,218.05Current price is: £1,218.05. Inc VAT: £1,461.66
Add to basket -
Save
15%
On RRP
Fluke 715 Volt/mA Calibrator
- Measure / Source mV Range: 0 to 200 mV, Resolution: 0.01 mV, Accuracy: 0.015% 2 counts
- Measure / Source V Range: 0 to 20 V, Resolution: 0.001 V, Accuracy: 0.01% 2 counts
- Measure / Source/ Simulate mA (% of span) Range: 0 to 24 mA (-25% to 125%), Resolution: 0.001 mA, Accuracy: 0.01% 2 counts, Note: Sink (simulate transmitter) Display mA or % of span
- Loop Power Range: 24 V dc, Accuracy: /- 10%, Note: Drive; 20 mA into 1000 Ω for battery >6.8V; 700 Ω for battery 5.8 to 6.8 V
- Display Clear 5 digit LCD
- Operating Temperature -10ºC to 55ºC
- Storage Temperature -40ºC to 60ºC
- Humidity (Without Condensation) 95% (10 ºC to 30 ºC); 75% (30 ºC to 40 ºC); 45% (40 ºC to 50 ºC); 35% (50 ºC to 55 ºC)
- Operating Altitude 3,000m max
- Safety CSA C22.2 No. 1010.1:1992
- Size 187 mm L x 87mm W x 32 mm, (7.93 in. L x 3.86 in. W x 2.06 in D)
- Weight Approx. 330 g (21 oz)
- Shock & Vibration Random, 2G, 5-500 Hz 1m drop test
- Battery type Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline
£1,672.00 Original price was: £1,672.00.£1,421.20Current price is: £1,421.20. Inc VAT: £1,705.44
Add to basket -
Fluke 724 Temperature Calibrator
- Handheld and portable - ideal for use out in the field
- One tool for all temperature calibration needs
- Sources and measures 12 thermocouple types - J, K, T, E, R, S, B, L, U, N, XK and BP
- Measure and source seven RTD types - NI-120, PT-100 (385), PT-100 (393), PT-100 (JIS), PT-200 (385), PT-500 (385) and PT-1000 (385)
- Handles high speed pulsed RTD circuits
- Provides loop power
- Dual display shows temperature source and loop current simultaneously
- Simple to use interface
- Also measure volts and ohms
- Perform fast linearity tests with 25% and 100% steps
- Execute remote tests with auto step and auto ramp
- Power transmitters during test using loop power supply with simultaneous mA measurement
- Storage of frequency used testing set-ups for easier repeated testing
- Backlight for working in poor lighting conditions
£2,990.00 Inc VAT: £3,588.00
Add to basket