01785 600 691enquiries@thecalcentre.co.uk




Fluke 709 Precision Loop Calibrator

Original price was: £1,190.00.Current price is: £1,011.50. Inc VAT: £1,213.80

    Available on back-order

    Calibration Certificate

    Add a 12 Month Calibration Certificate


    Fluke 709 Precision Loop Calibrator

    The Fluke 709 Precision Loop Calibrator can be used to perform mA, source, mA simulate, mA read, mA read/loop power and volts read functions with ranges of 0 to 24mA and 0 to 30V DC.

    Fluke’s 709 is a portable, handheld unit that’s designed to save time carrying out calibration procedures, speeding up time and producing high quality results as well. It’s designed to reduce the overall time users spend measuring or sourcing voltage/current or alternatively powering up a loop.

    Featuring high accuracy readings (with best in class accuracy of 0.01% reading), the Fluke 709 also comes with a large built-in screen and rotary dial for quickly adjusting the tester. It also has a built in 25Ω resitor for HART communication.

    Fluke 709 Technical Specifications

    FunctionsmA source, mA simulate, mA read, mA read/loop power, volts read
    RangesmA (0 to 24mA) and Volts (0 to 30V DC)
    Resolution1μA on mA ranges and 1mV on voltage range
    Accuracy0.01% ± 2 counts, all ranges (@23° ± 5°C)
    Operating Temperature Range-10 to 55°C (14 to 131°F)
    Humidity Range10 to 95% non-condensing
    Stability20ppm of F.S /°C from -10 to 18°C and 28 to 55°C
    Display128 x 64 pixels, LCD graphic w/backlight, .34 high digits
    Power6 AAA alkaline batteries
    Battery Life40 hours typical
    Loop Compliance Voltage24VDC @ 20mA
    Over-Voltage Protection240VAC
    Overload Current Protection28mA DC
    EMCEN61326 Annex A (Portable Instruments)
    Dimensions (L x W x D)15cm x 9cm x 3cm (6 x 3.6 x 1.3in)
    Weight0.3kg (9.5 ounces)
    • High accuracy loop calibration system
    • Small and rugged design – portability and durability in one unit
    • Simple-to-use user interface with rotary knob for ease of use
    • Built in selectable 25Ω resistor for HART communication
    • 24V DC loop power when using mA measure mode (-25% to 125%)
    • Resolution of 1μA on mA ranges and 1mV on voltage ranges
    • Simple two wire connection
    • Auto shutdown when left idle
    • Variable step and ramp time in seconds
    • Adjustable span selection
    • Valve test
    • Fluke 709 Precision Loop Calibrator
    • AC175 Alligator Clip Set
    • TL75 420L Test Leads
    • Soft Case
    • Six AAA Batteries (Installed)
    • Product Manual CD-ROM
    • Quick Reference Guide
    • Safety Information