Save

34%

On RRP

Metrel A1532 XA EVSE Adapter

£425.00 Inc VAT: £510.00

    SKU A1532XA Categories , Brand:

    Description

    Metrel A1532 XA EVSE Adapter

    The Metrel A1532 XA EVSE Adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. XA version supports 3 phase load testing up to 13 A and different error types, including PE open. If used together with Metrel AutoSequences®, prebuilt in the newer multifunctional testers, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.
    Key features
    • Banana socket outputs for connection to a 3-phase installation tester;
    • Voltage indicators on EVSE output;
    • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection;
    • Control Pilot resistance selector for simulation of electric vehicle status;
    • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE);
    • Type 2 Male Plug connector for connection to EVSE;
    • 6 mA EV RCD support;
    • Functional tests support;*
    • EVSE AUTO SEQUENCE® support;*
    • MESM report creation;**
    • Load testing up to 13 A on socket – 1 phase or on banana sockets – 3 phase;
    • Fault simulation of Diode short, PE-CP short and PE open;
    • Output BNC connector for CP signal monitoring.

    Dimensions (w x h x l): 200 x 100 x 70 mm

    • Banana socket outputs for connection to a 3-phase installation tester;
    • Voltage indicators on EVSE output;
    • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection;
    • Control Pilot resistance selector for simulation of electric vehicle status;
    • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE);
    • Type 2 Male Plug connector for connection to EVSE;
    • 6 mA EV RCD support;
    • Functional tests support;*
    • EVSE AUTO SEQUENCE® support;*
    • MESM report creation;**
    • Load testing up to 13 A on socket – 1 phase or on banana sockets – 3 phase;
    • Fault simulation of Diode short, PE-CP short and PE open;
    • Output BNC connector for CP signal monitoring.
    • Instrument EVSE adapter
    • Small soft carrying bag
    • Instruction manual