ETI RayTemp 8 Infrared Thermometer

£55.20 Inc VAT: £66.24

    Out of stock


    ETI RayTemp 8 Infrared Thermometer

    The ETI RayTemp 8 Infrared Thermometer is more than just a standard infrared, non-contact thermometer; this instrument also allows you to connect up a type K temperature probe to measure parameters such as air, liquid and surface temperatures directly.

    The RayTemp 8’s dual measurement capabilities give you everything you need for comprehensive temperature measurements in a wide variety of applications. Use the infrared mode to easily test food, hot surfaces and other applications where direct contact may be difficult, then use any type K temperature probe to perform more direct measurements as and when needed.

    For added precision when testing using the infrared mode, the RayTemp 8 includes ETI’s 8 dot circular targeting system. The area of measurement is the diameter inside the dots; the size of the measurement spot will increase/decrease depending on how far away the thermometer is (ETI recommends a distance-to-spot ratio of 12:1; hold the thermometer around 12 inches away for a measurement spot of 1 inch).

    When measuring, the RayTemp 8 can measure infrared surface temperatures from -60 to 500°C; this range is increased to -64 to 1370°C when testing using a type K thermocouple probe. Need to calculate high and low temperatures over a period of time? Use the RayTemp 8’s MIN/MAX function for this task!



    • Dual function digital thermometer – infrared, non-contact surface measurements plus a type K connector for use with a wide variety of optional type K thermocouple probes (sold separately)
    • Infrared temperature range from -60 to 500°C
    • Type K measurement range from -64 to 1370°C
    • Precision 8 dot circular laser targeting system for infrared mode
    • 12:1 distance-to-spot ratio (hold around 12 inches away for a measurement spot of 1 inch)
    • Resolution of 0.1°C/°F from -9.9 to 199.9°C, then 1°C above this range
    • Accuracy of ±2% of reading for infrared, ±1% for probe
    • Switch between Celsius and Fahrenheit measurement modes
    • MIN/MAX mode calculates and displays the minimum or maximum values taken over a period of time
    • Calculates the difference between MAX/MIN temperatures and also displays average temperature
    • Powered by 2 x 1.5V AAA batteries with up to 180 hours of continuous use battery life