Save

26%

On RRP

Amprobe AMP-210-EUR True RMS Clamp Meter

£102.60 Inc VAT: £123.12

    SKU AMP-210-EUR Categories , Brand:

    Description

    Amprobe AMP-210-EUR True RMS Clamp Meter

    Fast response, low pass filters and error-free measurements; they’re all part of the Amprobe AMP-210-EUR True RMS Clamp Meter, a true RMS clamp meter for modern electrical environments.

    Suitable for testing AC current to 600A, the Amprobe AMP-210 has jaw opening of 30mm for direct connection to smaller and medium-sized wiring. It’s fully suitable for use on all electrical systems, including distorted, non-sinusoidal signals (true RMS function stabilises the measurements) and variable frequency drives (low pass filter function).

    The AMP-210 also functions as a digital multimeter; it can test capacitance for start and run motor capacitors, tests resistance and continuity to verify the quality of electrical connections etc and will also check frequency. A built-in non-contact voltage detector is also included to verify whether a wire is live or not before connection.

    There’s more to this clamp meter than just measurements – it also includes a relative zero function, a data hold function which will temporarily freeze the value on the screen, a backlight for use in poor lighting conditions and automatic power off when left idle.

    Amprobe AMP-210 Technical Specifications

    Safety Rating CAT III 600V
    Jaw Opening 1.18inches (30mm)
    AC Voltage (True RMS) Range: 0 to 600.0V
    Accuracy: ±1.0% 5LSD (50 to 60Hz)
    DC Voltage Range: 0 to 600.0V
    Accuracy: ±1.0% 5LSD
    AC Current (True RMS) Range: 0 to 600.0A
    Accuracy: ±1.8% 5LSD (50 to 100Hz), ±2.0% 5LSD (100 to 400Hz)
    Precise Low AC Current Range: 0 to 60.00A
    Accuracy: ±1.5% 5LSD (50 to 60Hz)
    Frequency Range: 5.00 to 999.9Hz
    Accuracy: ±1.0% 5LSD (600V range)
    Range: 50.0 to 400.0Hz
    Accuracy: ±1.0% 5LSD (600A range)
    Resistance Range: 0.0 to 60.00kΩ
    Accuracy: ±1.0% 5LSD
    Capacitance Range: 0.0 to 2500μF
    Accuracy: ±2.0% 4LSD
    Continuity Beeper On ≤ 10Ω
    OFF > 250Ω
    Non-Contact Voltage 10 to 1000V AC, 50/60Hz
    General Specs
    Display 3-5/6 digits, 6000 count
    Polarity Automatic
    Update Rate 5 seconds nominal
    Operating Temperature 32 to 104°F (0 to 40°C)
    Relative Humidity 80% at 30°C, 50% at 40°C
    Operating Altitude 0 to 2000m
    Pollution Degree 2
    Storage Temperature -4 to 140°F (-20 to 60°C), <80% RH
    Temperature Coefficient Nominal 0.15x (specified accuracy)/°C (0 to 18°C or 28 to 40°C)
    Battery 2 x AAA (1.5V)
    EMC Meets EN 61326-1:2006
    Safety Compliance UL/IEC/EN 61010-1 ed. 3.0,
    IEC/EN 61010-2-033 ed. 1.0,
    CAN/CSA C22.2 NO. 61010-1
    ed. 3.0, IEC/EN 61010-2-032
    ed. 3.0 & IEC/EN 61010-031
    ed. 1.1
    Certification UL (c/us) and CE
    Dimensions (L x W x H) 8.62 x 3.03 x 1.46 inches (219 x 77 x 37mm)
    Weight 208g (0.46lbs)
    • Measure AC Current to 0 to 600A
    • Jaw opening of 30mm
    • AC/DC voltage measurements from 0 to 600V
    • True RMS – ensures accuracy on irregular waveforms
    • Precise low current function from 0 to 60A
    • Frequency measurements from 5.00 to 999.9Hz
    • Resistance measurements from 0.0 to 60.00kΩ
    • Capacitance measurements from 0.0 to 2500μF
    • Continuity test with beeper
    • Non-contact voltage detector with range from 20 to 440V (50/60Hz)
    • Low pass filter
    • Autoranging
    • Relative zero function
    • MAX/MIN/AVG measurements over a period of time
    • Diode test
    • Data hold function temporarily freezes a value on the screen
    • Backlight
    • Auto power off when left idle
    • Amprobe AMP-210-EUR Clamp Meter
    • User Manual
    • Test Leads
    • Carrying Case
    • 2 x AAA Batteries