Save

30%

On RRP

Metrel A1532 EVSE Adapter

£386.40 Inc VAT: £463.68

    Description

    Metrel A1532 EVSE Adapter

    The Metrel A1532 EVSE Adapter is a special accessory intended for testing Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers. It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector. If used together with the MI 3152 EurotestXC’s AUTO SEQUENCE®, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.

    MEASURING FUNCTIONS

    • Banana socket outputs for connection to 3-phase installation tester.
    • Voltage indicators on EVSE output.
    • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
    • Control Pilot resistance selector for simulation of electric vehicle status.
    • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
    • Type 2 Male Plug connector for connection to EVSE.
    • 6 mA EV RCD support.
    • Functional tests support*.
    • EVSE AUTO SEQUENCE® support*.
    • MESM report creation**.
    • Basic support:
    • A 1532
    • Partial support:
    • 6 mA EV RCD
    • EVSE report**
    • Full support:
    • Functional test support
    • EVSE AUTO SEQUENCE® support

    * Functional tests and AUTO SEQUENCE® are supported only on the MI 3152 EurotestXC and MI 3152 H EurotestXC 2.5 kV testers.
    ** Report printing is only available via the MESM PC SW. The MESM license (P 1101) is to be purchased separately.

    APPLICATION:

    • On-site testing of EVSE charging station installation.
    • Initial and periodic testing of private, semi-private and public EVSE charging stations.

    Dimensions (w x h x l): 200 x 100 x 70 mm

    • Banana socket outputs for connection to 3-phase installation tester.
    • Voltage indicators on EVSE output.
    • Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
    • Control Pilot resistance selector for simulation of electric vehicle status.
    • Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
    • Type 2 Male Plug connector for connection to EVSE.
    • Instrument EVSE adapter
    • Small soft carrying bag
    • Instruction manual

    Metrel A1532 Datasheet

    Metrel A1532 Datasheet