Description
Kewtech KEW8124 Clamp Sensor for KEW6310 AC1000A
This Kewtech KEW8124 Clamp Sensor is specifically made for use with Kewtech’s KEW6310 power quality analyser, as well as 5010/5020, 6305, 6300 and 6315 models.
It can measure rated current up to 1000A AC and includes 68mm diameter jaws for clamping around a conductor.
Kewtech KEW8124 Technical Specifications
| Conductor Size | 68mm |
| Rated Current | 1000A AC |
| Output Voltage | 500mV AC / 1000A (AC 0.5mV/A) |
| Accuracy | ±0.5% rdg ± 0.2mV (50/60Hz) ±1.5% rdg ± 0.4mV (40Hz – 1kHz) |
| Phase Shift | Within ±1.0° (45-65Hz) |
| Withstand Voltage | AC 5350V for 5 seconds |
| Cable Length | Approx 3m |
| Output Connector | MINI DIN 6 pin |
| Operating Temperature Range | 0-50°C, less than 85% RH (without condensation) |
| Output Impedance | Approx 1Ω |
| Applicable Standards | IEC 61010-1: 2001 IEC 61010-2-032: 2002 CAT III 600V Pollution degree 2 |
| Dimensions | 186 (L) x 129 (W) x 53 (D) mm |
| Weight | Approx 510g |
Kewtech KEW6310 Compact Power Quality Analyser Key Features
- Compact design for use out in the field
- Multiple testing procedures
- Instant value generation
- Measures energy consumption
- Demand monitor/protection
- Wave form and vector diagrams
- Harmonic measurements and analysis
- Power quality analysis
- Power factor and corrective capacitor measurements
- Flexible current clamps allow current measurements
- Print screen function
- Four current channel for measured neutral current or earth leakage
- Colour coded leads
- Works with batteries or mains power
- Internal memory can be expanded up to 1GB with flash card
- Digital output for use on control max demand
- Two additional inputs for external sensors
- IEC 61010-1
