Description
Fluke i2000 Flexible Current Clamp (2000 A)
This Fluke i2000 Flexible Current Clamp (2000 A) is a flexible AC current measurement tool that can be used to attach to difficult applications that conventional clamp meters would struggle with. Shipping as standard with flexible cabling, the i2000 can bend around practically any application in order to measure current across three ranges of 20A, 200A and 2000A.
This clamp is not actually a meter – it is designed to be used with multimeters, recorders or data loggers to give these devices the ability to carry out measurements of current.
The clamp has maximum conductor diameter of 178mm and is CAT III 600V safety rated.
Fluke i2000 Technical Specifications
| Current ranges | |
| Output sensitivity (AC-coupled) | | 100 mV | | 10 mV | | 1 mV | | 1 mV per A |
|
| Load impedance | |
| Accuracy | | at 25 °C | ± 1 % of range (45 Hz to 65 Hz) |
|
| Linearity | | 10 % to 100 % of range | ± 0.2 % of reading |
|
| Noise | | 8 mV ac rms (30 A) | | 2 mV ac rms (300 A, 3000 A) |
|
| Frequency range | |
| Phase error | | < ± 1 º (45 Hz to 65 Hz) | | ± 10 º (at 20 kHz) |
|
| Position sensitivity | | with cable > 25 mm from the coupling | ± 2 % of range |
|
| External field | | with cable > 200 mm from the head | ± 1 % of range |
|
| Power supply | | 2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator |
|
| Temperature Coefficient | |
| Working voltage | | see Safety standards section | 600 V AC rms or DC |
|
| General Specifications |
| Head Circumference | |
| Head cable diameter | |
| Head bend radius | |
| Cable length (head to electronics) | |
| Output connection | | Molded 4 mm safety plugs (not integrated) |
|
| Operating temperature range | | 0 °C to 70 °C (32 °F to 158 °F) (head and electronics) |
|
| Storage temperature range | | -40 °C to 105 °C (-40 °F to 221 °F) (head) | | -20 °C to 85 °C (-4 °F to 185 °F) (electronics) |
|
| Operating humidity | | 15 % to 85 % (non-condensing) |
|
| Weight | | 180 g (6.34 oz) (head) | | 190 g (6.70 oz) (electronics) |
|
| Safety standards | | EN 61010-1: 2001 | | EN 61010-2-032: 2002 | | EN 61010-031: 2002 | | 600 Vrms, Category III, Pollution Degree 2 | | Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz. |
|
| EMC standards | | EN 61326: 1998 A1, A2, & A3 |
|
| Dimensions | | HxWxD | 116 mm x 68.5 mm x 30 mm (4.56 in x 2.69 in x 1.18 in) |
|
Our customers are also considering these Clamp Adapters
https://www.fluke.com/en-gb
