Description
Fluke i1010 AC/DC Current Clamp (1000 A)
The Fluke i1010 AC/DC Current Clamp (1000 A) enables measurements of AC/DC current levels from 1A up to 1000A and is compatible with conductors up to 30mm in diameter.
Using a Hall effect sensor to ensure measurement accuracy, this device is a highly effective tool for increasing the versatility of a standard meter that doesn’t have the facility to carry out current measurements. All tests are carried out with 2% 0.5A accuracy.
Please note that the Fluke i1010 is not a clamp meter – it is a clamp accessory designed to be used with other Fluke equipment such as multimeters to enable direct current measurements without breaking a circuit.
Fluke i1010 Technical Specifications
| Measurement type | |
| Nominal current range | |
| Continuous current range | | 1 A – 600 A, AC | | 1 A – 1000 A, DC |
|
| Maximum Non-Destructive Current | |
| Lowest measurable current | |
| Basic Accuracy | | 2% 0.5 A | | (% reading floorspec) |
|
| Useable frequency | |
| Output level(s) | |
| Zero error adjustment | |
| Safety Specifications |
| Safety | |
| Maximum voltage | |
| Mechanical & General Specifications |
| Warranty | |
| Battery Life | |
| Maximum conductor diameter | |
| Output cable length | |
| Shrouded banana plugs | |
