01785 600 691enquiries@thecalcentre.co.uk




Fluke 771 Milliamp Process Clamp Meter

Original price was: £781.00.Current price is: £663.85. Inc VAT: £796.62

    Available on back-order

    Calibration Certificate

    Add a 12 Month Calibration Certificate


    Fluke 771 Milliamp Process Clamp Meter

    The introductory device in Fluke’s 700 series of process clamp meters, this Fluke 771 Milliamp Process Clamp Meter can be used to carry out non-contact mA loop measurements with high accuracy of 0.2%.

    When testing 4 to 20mA signals the 771 doesn’t require the user to break the loop, speeding up testing time with no need whatsoever to carry out loop isolation. It can also be used measure mA signals for PLC and control system analogue I/O without breaking the loop in order to measure low level DC current.

    The clamp of the 771 can be detached, making it easier to insert the unit into difficult areas. A measurement spotlight is also included as part of the tester, allowing the user to illuminate the testing point and ensure that they can see exactly what they’re doing.

    The 771 also includes a 99.9mA range mode which is ideal for measuring 10 to 50mA signals in older control systems.

    Fluke 771 Technical Specifications

    Diameter of Measurable Conductor0.1777″ or 4.5mm max
    Operating Temperature-10 to 50°C
    Storage Temperature-25 to 60°C
    Operating Humidity<90% @ <30°C, 75% @ 30 to 55°C
    Operating Altitude0 to 2000m
    IP RatingIP 40
    Size59 x 38 x 212mm (2.32 x 1.5 x 8.35″)
    Weight260g (9.1oz)
    VibrationRandom 2g, 5 to 500Hz
    Shock1 meter drop test (excludes jaw)
    EMI/RFIMeets EN61326-1
    Note: for current measurement w/jaw add 1mA to specification for EMC
    field strengths of 1V/m up to 3V/m
    Temperature Coefficient0.01%°C
    (<18? OR >28?)
    Power, Battery Life2 x AA 1.5V Alkaline, IEC LR6, 40 Hours Typical
    WarrantyThree years for electronics
    One year for cable and clamp assembly
    mA MeasurementResolution and Range: 0 to 20.99mA
    Accuracy: 0.2% 2 counts
    Resolution and Range: 21.0mA to 100mA
    Accuracy: 1% 5 counts
    • 0.2% accuracy
    • Data hold function
    • Measure 4 to 20mA sources without breaking a loop
    • Auto off and backlight dimmer conserve battery life
    • Measures 10 to 50mA signals in older control systems using 99.9mA range
    • Measurement spotlight illuminates darkened areas
    • Dual backlit display shows mA measurement and percent of 4 to 20mA span
    • 0.01mA resolution and sensitivity
    • Fluke 771 Milliamp Process Clamp Meter
    • Soft Carrying Case
    • User Manual