Showing 1–12 of 16 results
-
Save
30%
On RRP
Amprobe EV-520-UK Vehicle Charging Station Test Adapter Kit
- Separate phase indication by three LED lamps for easy check if voltage is present.
• Mains socket offering the possibility to connect an external load to check if the electric power meter works and counts in the right manner.
• IP 54 rating - Dust and splashing water protected
£699.00 £489.30 Inc VAT: £587.16 Add to basket -
Save
35%
On RRP
FLUKE 1664FC Amprobe EV-520-UK EVSE KIT
- Separate phase indication by three LED lamps for easy check if voltage is present
- Mains socket offering the possibility to connect an external load to check if the electric power meter works and counts in the right manner
- EV-connectors for type 2 and type 1
£2,076.00 £1,349.40 Inc VAT: £1,619.28 Add to basket -
Save
35%
On RRP
Kewtech KEWEVSE EVSE Adapter
- Enables electrical safety testing of electric vehicle charging points
- 4 mm connectors and alternative BS1363 socket for connecting your tester
- For testing domestic and commercial EV charging equipment
- CP & PP state adjustment rotary switches
- PE error & CP error simulation test
- Oscilloscope output
- Carry case included
- Printed manual
- Compact
- Easy to use
£650.00 £422.50 Inc VAT: £507.00 Add to basket -
Save
45%
On RRP
Kewtech KT66EV EVSE Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,241.00 £1,232.55 Inc VAT: £1,479.06 Add to basket -
Save
33%
On RRP
Megger EVCA210-UK Electric Vehicle Charge-Point Adapter
- Use with a single or multifunction tester to verify the functionality and safety of EV charge points
- Suitable for checking single- and three-phase EV charge points
- Maintain compliance with IEC/ EN 61851-1 and IEC/ HD 60364-7-722
- Mains socket
- 4mm connection points: L1, L2, L3, N and PE
- CP signal terminals for connecting an oscilloscope to measure CP signals
- Fully test Mode 3 AC electric vehicle charge points
- Compliant with UK, European and other international wiring regulations
- Compliant with the Low Voltage Directive LVD 2014/35
- Type 2 connector for testing charging points with panel-mounted sockets or a fixed cable with a vehicle connector
- Type 1 connector for checking charging points with a fixed type 1 cable connector, such as those found on a Mitsubishi PHEV
- Simulates the connection of an EV to the charging point
- PP charging state simulation
- CP charging state simulation
- Rotary switch
- Push-button for CP Error “E” simulation
- Push-button for PE Error (Earth Fault) simulation
- Push-button for PE Pre-Test
- IP54
- CAT II 300V
- Ergonomic and easy-to-use adapter specifically designed for testing the safety and effectiveness of EV charging points
£525.00 £350.00 Inc VAT: £420.00 Add to basket -
Save
45%
On RRP
Megger MFT1741 PLUS Multifunction Tester EVCA210-UK EV EVSE KIT
- Troubleshoot and verify the functionality and safety of industrial, commercial and domestic fixed wiring installations
- Check EV charge points using the Megger EVCA210-UK (see below)
- Ideal for testing low voltage electrical installations in areas with high electrical noise
- Includes all the tests required to complete the relevant electrical certification
- Please see the table above for an overview of the MFT1741 ’s testing capabilities
- Visual and audible hazardous voltage indicators
- Stops testing if a hazardous voltage is detected during insulation and continuity tests
- NEW non-trip loop impedance technology
- NEW confidence meter
- NEW auto sequence for EV charge point RCDs
- Large, clear, backlit, dual-readout display
- Readings and test parameters are displayed in parallel
- Digital/ analogue arc for indicating fluctuating readings
- Colour-coded function controls
- Function controls reduce the possibility of selecting the incorrect function or range
- Does NOT include hidden or complicated measurement menus
- Ambidextrous design: TEST and LOCK functions on either side
- Automatic test start supports hands-free operation
- Supplied with a neck strap
- Stands independently
- IP54
- Powered by internal rechargeable batteries
- Approximate battery life: four hours
- Easy-to-use and ergonomic test instrument with an eclectic array of test functions
£2,160.00 £1,195.00 Inc VAT: £1,434.00 Add to basket -
Save
30%
On RRP
Metrel A1532 EVSE Adapter
- Banana socket outputs for connection to 3-phase installation tester.
- Voltage indicators on EVSE output.
- Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
- Control Pilot resistance selector for simulation of electric vehicle status.
- Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
- Type 2 Male Plug connector for connection to EVSE.
£521.00 £365.00 Inc VAT: £438.00 Add to basket -
Save
30%
On RRP
Metrel A1532 XA EVSE Adapter
- Banana socket outputs for connection to a 3-phase installation tester;
- Voltage indicators on EVSE output;
- Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection;
- Control Pilot resistance selector for simulation of electric vehicle status;
- Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE);
- Type 2 Male Plug connector for connection to EVSE;
- 6 mA EV RCD support;
- Functional tests support;*
- EVSE AUTO SEQUENCE® support;*
- MESM report creation;**
- Load testing up to 13 A on socket - 1 phase or on banana sockets - 3 phase;
- Fault simulation of Diode short, PE-CP short and PE open;
- Output BNC connector for CP signal monitoring.
£607.00 £425.00 Inc VAT: £510.00 Add to basket -
Save
35%
On RRP
Metrel EVSE KIT1 – MI3125BT Multifunction A1532 EVSE
- Bluetooth connectivity - wirelessly connect your smartphone to your multifunction tester (requires optional license - sold separately)
- Automatic loop evaluation function with built in loop impedance tables
- B-type RCD testing: suitable for testing AC and DC sensitive RCD’s, including Type EV RCD and RCM for EVSE installations
- Fully downloadable with built-in memory: interfaces directly with a PC via RS232 or USB cable (PC software included)
- Integrated help screens give advice when working on site
- Upgradeable unit: the MI3125BT can be upgraded to stay in line with the latest regulations
- Performs both 2-wire and 3-wire earth spike testing
- Monitors all three voltages in real time with online voltage monitoring
- Automatic polarity reversal when carrying out continuity testing
- Selectable insulation test voltages from 50V to 1000V
- TripLock function: Zs (RCD) function performs a loop test without tripping RCDs
- Fully rechargeable
- Automated RCD testing
- Phase sequence testing
- Use with the Metrel MI3125BT to test Mode 3 EVSE with type-2 connectors
- Banana socket output for connection of three-phase installation testers
- Socket output for connection of one-phase installation testers (phase 1, neutral and PE)
- Type-2 male plug connector for attachment to EVSE
- Verify the safety and functionality of EVSE
- Test 6mA EV RCDs
- Create comprehensive EVSE reports (when used with the Metrel MI3125BT1 and MESM software)
- Voltage indicators for EVSE output
- Proximity pilot resistance selector for simulating EV cable presence and current rating detection
- Control pilot resistance selector for simulating EV status
- Compact, comprehensive and clever instrument
- Enables testing of EVSE such as electric vehicle charging stations
£1,231.00 £800.15 Inc VAT: £960.18 Add to basket -
Save
35%
On RRP
Metrel EVSE KIT2 – MI3125BT Multifunction A1532XA EVSE
- Bluetooth connectivity - wirelessly connect your smartphone to your multifunction tester (requires optional license - sold separately)
- Automatic loop evaluation function with built in loop impedance tables
- B-type RCD testing: suitable for testing AC and DC sensitive RCD’s, including Type EV RCD and RCM for EVSE installations
- Fully downloadable with built-in memory: interfaces directly with a PC via RS232 or USB cable (PC software included)
- Integrated help screens give advice when working on site
- Upgradeable unit: the MI3125BT can be upgraded to stay in line with the latest regulations
- Performs both 2-wire and 3-wire earth spike testing
- Monitors all three voltages in real time with online voltage monitoring
- Automatic polarity reversal when carrying out continuity testing
- Selectable insulation test voltages from 50V to 1000V
- TripLock function: Zs (RCD) function performs a loop test without tripping RCDs
- Fully rechargeable
- Automated RCD testing
- Phase sequence testing
£1,317.00 £856.05 Inc VAT: £1,027.26 Add to basket -
Save
35%
On RRP
Metrel EVSE KIT3 – MI3152 Eurotest XC ES Multifunction A1532 EVSE
- Predefined profile dependent AUTO SEQUENCEs
- Predefined Automatic tests
- Built-in help screens for referencing on site.
- Built-in fuse tables for automatic evaluation of the line / loop impedance result.
- Monitoring of all 3 voltages in real-time.
- Automatic polarity reversal on continuity test.
- Automated RCD testing procedure.
- Automated Impedance testing procedure
- (Z AUTO).
- Functional inspections
- Measurement filtering
- Built-in charger
- BT communication with PC, android tablets and smartphones
- PC SW Metrel ES Manager
- Optional aMESM Android App
£1,990.28 £1,293.68 Inc VAT: £1,552.42 Add to basket -
Save
35%
On RRP
Metrel EVSE KIT4 – MI3152 Eurotest XC ES Multifunction A1532XA EVSE
- Predefined profile dependent AUTO SEQUENCEs
- Predefined Automatic tests
- Built-in help screens for referencing on site.
- Built-in fuse tables for automatic evaluation of the line / loop impedance result.
- Monitoring of all 3 voltages in real-time.
- Automatic polarity reversal on continuity test.
- Automated RCD testing procedure.
- Automated Impedance testing procedure
- (Z AUTO).
- Functional inspections
- Measurement filtering
- Built-in charger
- BT communication with PC, android tablets and smartphones
- PC SW Metrel ES Manager
- Optional aMESM Android App
£2,076.28 £1,349.58 Inc VAT: £1,619.50 Add to basket
