Showing 37–48 of 56 results
-
Save
34%
On RRP
Metrel MI3102BT EurotestXE Multifunction Tester
- Ideal for compliance with 17th Edition regulations, BS7671 and BS EN61557
- Insulation Test: Offering 50V, 100V, 250V, 500V and 1000V DC
- Continuity Test: 200mA DC test current with polarity change and 7mA test current without RCD tripping
- Line/Loop Impedance, with built-in fuse tables for automatic evaluation of the result
- Loop Impedance with Trip Lock RCD function
- TRMS voltage and frequency
- Phase sequence with voltage monitor between phases.
- Automated RCD Testing, including Ramp Test
- Power measurements and harmonics analysis
- Earth Resistance Test (3-wire and 2-clamps method)
- First fault leakage current (ISFL)
- Testing of Insulation Monitoring Devices (IMDs)
- Leakage True RMS - (optional Clamp required - part no. A1018 / A1019)
- Light/Lux Measurements (optional Lux Probe required - part no. A1172 / A 1173)
- Rechargeable batteries and in-built charger as standard
- Includes Eurolink PRO Software for downloading test data and report creation
- Built-in help screens for referencing on the job
- Lightweight and compact for your convenience
£1,423.72 Original price was: £1,423.72.£938.55Current price is: £938.55. Inc VAT: £1,126.26
Add to basket -
Save
36%
On RRP
Metrel MI3108PRO Eurotest PV Tester
- Combined photovoltaic and electrical installation measurement device
- Portable and lightweight
- Massive amount of measurement functions
- Calculation of STC values
- Efficiency calculations
- Graphical representation of module I-U curves
- 2 voltage and 2 current channels for simultaneous measurements
- Works with PV remote unit for simultaneous measurements of solar irradiation and temperature of PV modules
- Automated RCD testing
- Support for B type RCDs
- Earth resistance measurements
- Built-in fuse tables for automatic evaluation of line/loop impedance results
- Online monitoring of 3 voltages
- Scope function
- Loop impedance test with no RCD trippping
- 1 phase power and energy measurements
- Rechargeable batteries
- 1800 record memory storage
- Help screens
- Compatible with software package
£4,159.84 Original price was: £4,159.84.£2,678.00Current price is: £2,678.00. Inc VAT: £3,213.60
Add to basket -
Save
36%
On RRP
Metrel MI3108ST Eurotest PV Tester
- Voltage, current, power and energy
- UOC (open circuit voltage)
- ISC (short circuit current)
- I-U curve of PV modules and strings
- Irradiance
- Module temperature
- AC side measurements:
- Voltage, current, frequency, power, PF, energy, harmonics
- Efficiency of PV module, inverter and PV system calculation
- Electrical installation measurements:
- Insulation resistance
- Continuity of PE conductors
- Line impedance
- Loop impedance
- RCD testing
- Earth resistance
- AC current
- TRMS voltage
- Frequency
- Phase sequence
- Power, energy and harmonics
- General
- Calculation of STC values
- Efficiency calculations
- Graphic representation of curve
- Bult in memory
- Automated RCD testing
- Rechargeable batteries
£3,216.18 Original price was: £3,216.18.£2,070.00Current price is: £2,070.00. Inc VAT: £2,484.00
Add to basket -
Save
33%
On RRP
Metrel MI3121 Smartec Insulation And Continuity Tester
- Very large LCD display with bargraph and backlight
- High measuring range of up to 30 GΩ with test voltage from 50 V to 1000 V
- Fast and reliable continuity tests with automatic polarity reversal
- Voltage and frequency measurements
- Preprogrammed limits
- PASS/FAIL evaluation of measurement result
- Bright GREEN/RED indicators provides visual evaluation of results
- Suited for testing on CAT IV installations
- Magnetic holder allows hands-free operation
- Built-in battery charger
- Two level memory structure for saving of test results and parameters
- Basic downloading with EuroLink PRO PC SW package
- Compatible with EuroLink PRO Plus PC SW package
- USB and RS232 ports
- Robust and ergonomic design
£534.60 Original price was: £534.60.£360.00Current price is: £360.00. Inc VAT: £432.00
Add to basket -
Save
33%
On RRP
Metrel MI3125-L Eurotest Combo Lite Multifunction Installation Tester
- Perform a variety of electrical and installation safety tests
- Suitable for testing domestic and industrial installations
- Ideal for checking single and multiphase TT and TN systems
- Includes tests required by the EN 61557 standard
- TRMS voltage
- TRMS frequency
- Phase sequence
- Line impedance
- Loop impedance
- Loop impedance with Trip Lock RCD function (does not trip RCDs whilst testing)
- RCD testing (general and selective, type AC and A) with an automated testing procedure
- Continuity of PE conductors with a 200mA test current and an automatic polarity change
- Insulation resistance (measure up to 1000MΩ) with a DC test voltage (50-1000V)
- Dedicated help screens for each test
- Includes integrated fuse and RCD characteristics for the automatic evaluation of test results
- Includes loop impedance tables for evaluating loop and line impedance results in comparison to regulations
- Green LED light indicates that a result has passed
- Red LED light indicates that a result has failed
- LED lights are located in either side of the LCD display
- Large, graphic, easy-to-read display with backlight
- View measurement, measurement parameters and any messages via the display
- Monitor up to three voltages in real-time with the online voltage monitoring feature
- Optimised for longevity
- Built-in charger
- Supplied with a set of rechargeable NiMH batteries
- Upgradable technology allows the tester’s firmware to be updated in accordance with any changes in regulations
- Ideal for performing an eclectic variety of electrical and safety tests on single and multiphase TT and TN system
£789.48 Original price was: £789.48.£531.36Current price is: £531.36. Inc VAT: £637.63
Add to basket -
Save
33%
On RRP
Metrel MI3125BT Eurotest Combo Bluetooth Multifunction Tester
- Bluetooth connectivity - wirelessly connect your smartphone to your multifunction tester (requires optional license - sold separately)
- Automatic loop evaluation function with built in loop impedance tables
- B-type RCD testing: suitable for testing AC and DC sensitive RCD’s, including Type EV RCD and RCM for EVSE installations
- Fully downloadable with built-in memory: interfaces directly with a PC via RS232 or USB cable (PC software included)
- Integrated help screens give advice when working on site
- Upgradeable unit: the MI3125BT can be upgraded to stay in line with the latest regulations
- Performs both 2-wire and 3-wire earth spike testing
- Monitors all three voltages in real time with online voltage monitoring
- Automatic polarity reversal when carrying out continuity testing
- Selectable insulation test voltages from 50V to 1000V
- TripLock function: Zs (RCD) function performs a loop test without tripping RCDs
- Fully rechargeable
- Automated RCD testing
- Phase sequence testing
£918.00 Original price was: £918.00.£617.00Current price is: £617.00. Inc VAT: £740.40
Add to basket -
Save
36%
On RRP
Metrel MI3152-ES Entry Set Eurotest XC Multifunctional Electrical Tester
- Insulation resistance with DC voltage from 50 V to 1000 V;
- Continuity of PE conductors with 200 mA DC test current with polarity change;
- Continuity of PE conductors with 7 mA test current without RCD tripping;
- Line/Loop impedance;
- Loop impedance with Trip Lock RCD function;
- TRMS voltage and frequency;
- Phase sequence;
- Power and harmonics;
- RCD testing (general and selective, type AC, A, F, B, B );
- Earth resistance (3-wire and 2-clamps method);
- Specific earth resistance with Ro-adapter (option);
- TRMS leakage and load currents (option);
- First fault leakage current (ISFL);
- Testing of Insulation Monitoring Devices (IMDs);
- Illumination (option);
- High resolution Loop impendance (mΩ) (option).
£1,867.36 Original price was: £1,867.36.£1,189.00Current price is: £1,189.00. Inc VAT: £1,426.80
Add to basket -
Save
33%
On RRP
Metrel MI3201 TeraOhm 5Kv Plus Insulation Tester
- Suite of diagnostic tools - polarisation index, dielectric discharge, dielectric absorption ratio with automated resistance range
- Measures insulation resistance from 5kΩ to10TΩ
- Display of all measurement parameters in a single measurements
- Step voltage testing
- R(t) graph shows real time resistance on a time graph for plotting changes over time
- High charging capacity with 5mA charging current for charging current insulation systems up to 50μF
- High noise immunity to filter out the effects of noise
- CAT IV 600V safety rated for use in industrial environments
- Rugged hard carrying case
- USB and RS232 ports allow interfacing with PC
£2,159.11 Original price was: £2,159.11.£1,450.00Current price is: £1,450.00. Inc VAT: £1,740.00
Add to basket -
Save
33%
On RRP
Metrel MI3202 GigaOhm 5Kv Insulation Tester
- Measuring range up to 1 TΩ
- Analogue scale and digital LCD: measuring results are displayed both in numeric and analogue form.
- Quick set-up: quick and easy selection of test voltage (250 V; 500 V; 1 kV; 2,5 kV; 5 kV).
- Fast testing: 5 mA current source for quick charging of capacitive load.
- Guard test terminal: for elimination of potential surface leakage currents.
- Automatic discharge of tested object after test.
- Safe: high CAT IV / 600 V voltage protection.
- Easy to read: large bright LCD with backlight.
- Built-in charger & rechargeable batteries: Instrument has a built-in charger and comes complete with a set of rechargeable NiMH batteries.
- High quality accessories: shielded test leads are included in a standard set.
- Portable: lightweight 3 kg design with carry handle and shoulder strap
£1,804.31 Original price was: £1,804.31.£1,212.31Current price is: £1,212.31. Inc VAT: £1,454.77
Add to basket -
Save
33%
On RRP
Metrel MI3205 TeraOhm XA 5kV High Voltage Insulation Tester
- Powerful solution for measuring insulation resistance on high voltage systems and equipment
- Portable unit, built inside its own carrying case
- Measure insulation resistance to 15TΩ
- Adjustable test voltage from 50V to 5kV in 50V and 100V steps
- Perform PI, DAR and DD diagnostic tests
- Step voltage test
- Withstanding voltage test (DC) up to 10kV
- Voltage and frequency measurements up to 550V true RMS
- Programmable measurement timer
- Capacitance measurements
- Automatic discharge of test object after completion of measurement
- Guard terminal
- High voltage breakdown detection
- Set your own, custom-defined tests
- Auto adjustment function
- Built-in memory storage allows you to store your results in both numerical and graphical formats
- Download into the included software for further analysis, as well as test report printing
- Isolated RS232 and USB communication ports and BT interface
- High quality accessories, including shielded test leads, including as standard
- High EM interference protection with input AC current noise rejection (1mA@600V) and additional averaging of the result (5, 10, 30, 60)
- CAT IV 600V rated
- Can be powered by mains connection or by internal rechargeable batteries
£2,834.45 Original price was: £2,834.45.£1,904.76Current price is: £1,904.76. Inc VAT: £2,285.71
Add to basket -
Save
32%
On RRP
Metrel MI3210 TeraOhm XA 10kV High Voltage Insulation Tester
- Powerful solution for measuring insulation resistance on high voltage systems and equipment
- Portable unit, built inside its own carrying case
- Measure insulation resistance to 20TΩ
- Adjustable test voltage from 50V to 10kV in 50V and 100V steps
- Perform PI, DAR and DD diagnostic tests
- Step voltage test
- Withstanding voltage test (DC) up to 10kV
- Voltage and frequency measurements up to 550V true RMS
- Programmable measurement timer
- Capacitance measurements
- Automatic discharge of test object after completion of measurement
- Guard terminal
- High voltage breakdown detection
- Set your own, custom-defined tests
- Auto adjustment function
- Built-in memory storage allows you to store your results in both numerical and graphical formats
- Download into the included software for further analysis, as well as test report printing
- Isolated RS232 and USB communication ports and BT interface
- High quality accessories, including shielded test leads, including as standard
- High EM interference protection with input AC current noise rejection (1mA@600V) and additional averaging of the result (5, 10, 30, 60)
- CAT IV 600V rated
- Can be powered by mains connection or by internal rechargeable batteries
£3,804.81 Original price was: £3,804.81.£2,600.00Current price is: £2,600.00. Inc VAT: £3,120.00
Add to basket -
Save
32%
On RRP
Metrel MI3242 MicroOhm 2A Low Resistance Ohmmeter
- Measure low resistance levels in a wide variety of applications
- Portable, handheld and lightweight design
- Measurement range from 1μΩ to 199.9Ω
- Test current of up to 2A
- Manual Mode - checks continuity of C1 and C2 connectors, with current applied in forward and reverse directions
- Automatic Mode - test starts automatically when probes are connected, with current applied in forward and reverse directions
- Continuous Mode - allows repeated measurements to be made on the same sample
- Inductive Mode - used for measuring resistance of inductive loads like motors and generators
- High overvoltage protection (CAT III 600V) allows measurements in substations and other points with low line resistance
- Internal protection circuit protects the user and instrument from accidental connection to line
- 50/60Hz ripple detection and rejection
- Powered by rechargeable batteries - up to 800 measurements per charge
- Pre-programmed test limits with PASS/FAIL evaluation on screen and using green/red LED indicators
- Large 128 x 64 dot matrix display with backlight
- Store up to 1500 records, with time stamps, in internal memory
- Analyse your findings using Metrel's software package
£1,168.02 Original price was: £1,168.02.£798.00Current price is: £798.00. Inc VAT: £957.60
Add to basket
