Showing 1–12 of 13 results
-
Save
19%
On RRP
Fluke 179/EDA2/EUR Digital Multimeter Combo Kit
- 6000 count digital display
- Auto hold and manual hold
- Backlit screen
- Carries out temperature measurements using a thermocouple
- AC/DC voltage measurements up to 1000V
- AC/DC current measurements up to 10A
- Resistance measurements up to 50MΩ
- Capacitance measurements up to 10 000μF
- Continuity measurements
- Frequency measurements up to 100KHz
- True RMS AC voltage/current measurements
- MIN/MAX/AVG modes
- Manual/automatic ranging
£470.00 Original price was: £470.00.£380.70Current price is: £380.70. Inc VAT: £456.84
Add to basket -
Save
32%
On RRP
Kewtech KEWEVA EV Charge Point Testing Adapter
- CP Error auto-check for faster testing
- Uses standard 4 mm connectors rated at 10 A for testing purposes
- Works with any MFT with EV charging point testing capabilities
- Direct low-resistance connections for highly accurate results
- Suitable for single & three-phase charging equipment
- Red LEDs indicate the live status per phase
- Incorporates an IEC 62196-2 type 2 connector for EV charging units
- Single rotary dial controls the CP status simulation: standby, ready & charging
- Checks the charging station's PWM signal is at 1 Khz, confirmed by a blue LED
- Separate RED LED indicates when voltage is applied to output connectors
- Supplied with durable carry case
£515.00 Original price was: £515.00.£350.00Current price is: £350.00. Inc VAT: £420.00
Add to basket -
Save
44%
On RRP
Kewtech KEWEVSE EVSE Adapter
- Enables electrical safety testing of electric
vehicle charging points compatible with any
EVSE testing equipment
- 4 mm connectors and alternative BS1363
socket for connecting your tester
- For testing domestic and commercial
EV charging equipment
- CP & PP state adjustment rotary switches
- PE error & CP error simulation test
- Oscilloscope output
- Carry case included
- Printed manual
- Compact
- Easy to use
£715.00 Original price was: £715.00.£399.00Current price is: £399.00. Inc VAT: £478.80
Add to basket -
Save
47%
On RRP
Kewtech KT63 Plus 6 in 1 Multifunction Tester
- Anti-Trip Technology for full no trip LOOP testing on all RCD types
- Test button in probe as well as lockdown test button for ‘hands free’ testing
- Easy PFC & PSC measurement without the need to alter test probes
- 250, 500 & 1000V insulation tests with auto discharge
- Memory for test lead resistance compensation
- Backlit display
- RCD tests AC / A & ACS / AS
- Auto-test memory for RCD testing with all results shown on one screen, so no scrolling
- RCD ratings 10, 30, 100, 300, 500, 1000mA
- Phase Rotation
- Three ways to start a test - single press of the test button, handsfree use of the test button (continuous testing) or by the test button in the additional test probe
- Special DNO polarity test
- IP54
- End of line calibration certificate included
- Complies with BS7671
£1,375.00 Original price was: £1,375.00.£725.00Current price is: £725.00. Inc VAT: £870.00
Add to basket -
Save
46%
On RRP
Kewtech KT63DL Multifunction Tester
- Easy-to-use and capable of measuring up to five parameters
- Can measure continuity, insulation, loop impedance, PSC/ PFC and RCD
- Colour-coded rotary dial and function buttons for easily selecting tests and functions
- Function button for hands-free testing
- IP65
- NEW Anti-Trip Technology Loop Test: enables full no-trip loop testing on all RCD types with a low chance of RCD uplift and noise interference
- 250/ 500/ 1000V insulation test with auto discharge
- RCD ramp test
- Mains polarity test
- RCD Auto Test mode for 30mA RCDs
- Test Lead Auto-Null function for continuity tests
- Large LCD display
- PFC/ PSC measurements are displayed at the same time as the loop reading
- An easy-to-use, ergonomic and economical test instrument
£1,025.00 Original price was: £1,025.00.£549.00Current price is: £549.00. Inc VAT: £658.80
Add to basket -
Save
43%
On RRP
Kewtech KT66DL 12 in 1 Multifunction Tester
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£1,925.00 Original price was: £1,925.00.£1,089.00Current price is: £1,089.00. Inc VAT: £1,306.80
Add to basket -
Save
47%
On RRP
Kewtech KT66EV Multifunction Tester & EV Adapter Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,495.00 Original price was: £2,495.00.£1,329.00Current price is: £1,329.00. Inc VAT: £1,594.80
Add to basket -
Save
48%
On RRP
Kewtech KT66EV Multifunction Tester & KEWEVA Adapter Kit
- ATT Loop: Anti-Trip Technology (with 2 & 3 wire) for no trip
LOOP L-PE testing on all RCDs
- Loop: High test current range of 2R with 0.001R resolution
- RCD: Type AC, A, F, B (General & Selective), EV and Variable
RCDs
- Large colour dot matrix display
- all auto-tests on one screen
- three ways to test
- lockdown test button for continuous testing
- lid for extra protection
- comes with Kewtech’s popular G7 test leads
- A robust soft carry case with extra room for testing accessories
- printed manual with end of line calibration certificate is included
£2,395.00 Original price was: £2,395.00.£1,250.00Current price is: £1,250.00. Inc VAT: £1,500.00
Add to basket -
Seaward Apollo 400 PLUS Pat Tester
- Onboard storage for up to 2,000 appliance records
- Safety tests which ensure compliance with the IET 4th Edition Code of Practice
- Interchangeable rechargeable battery
- Create up to 25 user configurable electrical test and visual inspection sequences
- Point to point measurement (Rpe & IR) - needs an optional accessory
- Bluetooth, Scanner and Printer compatible
- Remote data transfer from field to the office
- High definition colour display
- Suitable for mid-volume PAT Testing
- Improved user interface for intuitive functionality and ease of use
- Full QWERTY Keyboard
- Easy to use - Plug & Play test sequences
£885.00 Inc VAT: £1,062.00
Add to basket -
Seaward Apollo 500 PLUS PAT Tester
- Onboard storage for up to 10,000 appliance records
- Safety tests which ensure compliance with the IET 4th Edition Code of Practice
- Interchangeable rechargeable battery
- Create up to 100 user configurable electrical test and visual inspection sequences
- Point to point measurement (Rpe & IR)
- Bluetooth, Scanner and Printer compatible
- Remote data transfer from field to the office
- High definition colour display
- Suitable for mid-volume PAT Testing
- Improved user interface for intuitive functionality and ease of use
- Full QWERTY Keyboard
- Ability to use (2D) QR codes
- Fast boot-up
- Built-in Risk-based retest calculator to quickly determine suggested retest periods
- Plug and Play use
£1,171.00 Inc VAT: £1,405.20
Add to basket -
Seaward Apollo 600 PLUS PAT Tester
- Storage for up to 50,000 records and 2,000 visual inspection images
- Onboard camera to prove visual inspection as per IET CoP
- Print new 2D barcodes using the Test n Tag Elite 2 printer
- New QR Code option on the printed label as well as a new free QR Data Viewer app which is available on both iOS and Android stores allowing the user to easily scan and read test data as well as share it.
- Download results onto a USB flash drive. Alternatively, transfer data directly using a USB lead when back at the office.
- Safety tests which ensure compliance with the IET 4th Edition Code of Practice
- Interchangeable rechargeable battery
- Built-in digital camera
- Create up to 100 user configurable electrical test and visual inspection sequences
- Built-in universal risk assessment tool allowing hazards to be recorded, risk scores to be calculated and corrective actions to be planned and documented easily.
- Additional health and safety certificates
- Point to point measurement (Rpe & IR)
- Bluetooth, Scanner and Printer compatible
- Remote data transfer from field to the office
- High definition colour display
- Suitable for mid-volume PAT Testing
- Improved user interface for intuitive functionality and ease of use
- Full QWERTY Keyboard
- Ability to use (2D) QR codes
- Fast boot-up
- Plug and Play use
£1,279.00 Inc VAT: £1,534.80
Add to basket -
Seaward PrimeTest 100 PAT Tester
- Compact, lightweight design
- Simple operation - even for PAT testing beginners
- Suitable for different testing types
- Full testing result display - once a test is completed this PAT tester will show the result as a full numerical reading as well as displaying a pass/fail value for reference
- Battery powered - don't worry about needing a mains outlet; the PrimeTest 100 can be taken wherever you need it
£354.00 Inc VAT: £424.80
Add to basket