Kewtech EZYPAT PAT Tester
The Kewtech EZYPAT PAT Tester is battery operated and capable of performing up to approximately 1400 tests before the batteries begin to expire. This PAT tester has been optimised to perform manual dead tests on Class I and Class II appliances as well as extension leads.
The Kewtech EZYPAT is the simplest model in Kewtech’s EZYPAT/ SMARTPAT range; for more information on the models within this range, please see the comparison table in the ‘Technical Specifications’.
The Kewtech EZYPAT can perform an array of tests, including:
- Appliance status pre-check (determines whether the appliance under investigation is on or off)
- Quick check continuity (1 second)
- 5-second continuity check
- Insulation tests (user selectable 250V DC or 500V DC)
- Substitute leakage test (user selectable limits)
- Extension lead test
- 200mA earth test
The Kewtech EZYPAT’s inclusion of a low current earth continuity test and 250V insulation test ensures that it is IT safe, whilst its Test Lead Null setting ensures that the user is able to attain accurate insulation measurements which are unaffected by the resistance of the test leads.
In addition to this, it features clearly labelled function buttons which allow the user to run automatic test sequences for Class I and Class II appliances, as well as extension cables. The results of all these tests are indicated via the EZYPAT’s large, easy-to-read, backlit display, which turns green for PASS and red for FAIL.
This product’s convenience is further improved by its lightweight and ergonomic design; extension lead adapter and earth continuity test lead with probe and crocodile clip, these features and accessories ensure that the EZYPAT is suitable for use in a variety of environments and can be easily adapted to perform multiple tests.
The battery operated Kewtech EZYPAT PAT Tester is versatile, convenient and efficient, the ideal portable appliance tester for those who wish to perform manual dead tests on items that do NOT require a power supply to switch on, i.e. appliances WITHOUT electronic on/off switches.
(PLEASE NOTE that the EZYPAT PLUS is suited to testing items (such as computers and TVs) with electronic on/off switches and which do require a power supply to start up.)
Kewtech EZYPAT PAT Tester – Battery Operated Technical Specifications
|Protective Conductor Resistance Test
|0.00 – 20.00 Ω (NULL value inc)*
|> 20.00 Ω
|5 V ±0.4 V DC
|200 mA DC (nominal value)
|* Resistances exceeding 3 Ω cannot be cancelled by NULL function.
|0.00 – 20.00 MΩ
|> 20.00 MΩ
|250V : 250 V DC 20%, -0%
|500V: 500 V DC 20%, -0%
|1.5 mA DC or less
|250V: 1 -1.2 mA with a load of 0.25 MΩ
|500V: 1 to 1.2 mA with a load of 0.5 MΩ
|0.10 – 12.00 mA rms
|> 12.00 mA
|Open-circuit Voltage/ Frequency
|30 V ±5 V rms / 50 Hz ±5%
|1.2 mA AC ±0.5 mA (when measuring 12.00 mA)
|Insulation Testy Between L-N
|4.5 V ±0.5 V DC
|Criteria of Judgement
|100 kΩ ±20 kΩ or less: LCD shows “<0.10 MΩ” and the measurement is halted.
|IEC/EN61010-1 CAT II 300V-instrument
IEC/EN61010-031 CAT III 600V
|Possible number of
battery voltage is within the
effective range (measuring
every 30 sec)
|Approx. 1400 times
(CLI Rpe: 0 Ω, Rins: 1.1 MΩ)
|Boxed Dimensions (L x W x D)
|261 x 140 x 130mm
Kewtech EZYPAT/ SMARTPAT Comparision Table
|200mA Continuity Test
|250V Insulation Test
|500V Insulation Test
|Substitute Leakage Test
|110V Load and Run Test
|230V Load and Run Test
|Portable RCD Test
|Compatible with KEWPAT App
|Customisable Test Sequences